Magenta 250A setup guide Transmitter to Receiver connections

CHAPTER 3: Setup and Installation

3.2.3CONNECTIONS ON THE VGA/AUDIO MULTIVIEW T4 TRANSMITTERS

The MultiView T4 four-port transmitter is used when the same signal is distributed to multiple display devices. You set it up and cable it the same as you would with the single-port transmitter.

Figure 3-3. T4 Transmitter connections with audio

3.2.4A TYPICAL SINGLE-PORT TRANSMITTER–RECEIVER APPLICATION

Figure 3-4 shows a typical application in which the single-unit transmitter

is	connected over
CAT5 to a	receiver.

Figure 3-4. Transmitter to Receiver connections.

.

3.2.5A TYPICAL MULTIVIEW T4 TRANSMITTER–RECEIVER APPLICATION

Figure 3-5 shows an application in which a MultiView™ Series T4 Transmitter is linked to four MultiView™ Series Receivers.

Figure 3-5. MultiView T4 Transmitter to Receiver connections.

47 98