Kenwood KAC-6203 Troubleshooting Guide, No sound, Blown fuse, Output level is too

Page 12

Troubleshooting Guide

What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems.

PROBLEM

POSSIBLE CAUSE

SOLUTION

No sound.

•

Input (or output) cables are

•

Connect the input (or output) cables.

(No sound from one side.)

 

disconnected.

 

 

(Blown fuse.)

•

Protection circuit may be activated.

•

Check connections by referring to

 

 

 

 

<Protection function>.

 

• Volume is too high.

•

Replace the fuse and use lower

 

 

 

 

volume.

 

• The speaker cord is shorted.

•

After check the speaker cord and

 

 

 

 

fixing the cause of the short, replace

 

 

 

 

the fuse.

The output level is too

•

The input sensitivity adjusting control

•

Adjust the control correctly referring

small (or too large).

 

is not set to the correct position.

 

to <Controls>.

The sound quality is bad.

• The speakers wire are connected with

•

Connect them properly checking the

(The sound is distorted.)

 

wrong 9 / · polarity.

 

9 / · of the terminals and wires

 

 

 

 

well.

 

• A speaker wire is pinched by a screw

•

Connect the speaker wire again so

 

 

in the car body.

 

that it is not pinched by anything.

 

• The switches may be set improperly.

•

Set switches properly by referring to

 

 

 

 

<System examples>.

12English

Page 11 Page 13
Image 12
Page 11 Page 13
Contents KAC-6203 Safety precautions Cleaning the unitTo prevent battery rise AccessoriesInstallation Do not install in the below locationsControls / Indicator Filter switchPower indicator Input Sensitivity controlProtection function is activated in the following situations Connection Terminal namesSpeaker output terminals Line in terminal Speaker level input terminalsInstallation procedure WiringSpeaker selection Combined impedanceCable Color of the connector Speaker level input ConnectionsPower wire connection Terminal cover Power control wire Battery wireProtective Fuse Battery Lead terminal Bridged ConnectionsSystem examples Channel systemChannel + Subwoofer system Left speaker Right speakerTri-mode Principle of Tri-modeExample Troubleshooting Guide No soundBlown fuse Output level is tooSpecifications Specifications subject to change without noticeAudio Section General
Related manuals
Manual 14 pages 13.62 Kb

KAC-6203 specifications

The Kenwood KAC-6203 is a compact and powerful car amplifier designed to enhance the audio experience in vehicles. Known for its reliability and performance, this 2-channel amplifier boasts several key features and technologies that cater to both casual listeners and audio enthusiasts alike.

One of the standout characteristics of the KAC-6203 is its compact size, which allows for flexible installation in various vehicle types without occupying excessive space. Despite its small footprint, it delivers an impressive power output of 60 watts RMS per channel at 4 ohms, and up to 90 watts RMS at 2 ohms. This makes it ideal for powering a pair of high-quality speakers while maintaining clear sound fidelity, even at higher volumes.

Equipped with a MOSFET power supply, the Kenwood KAC-6203 ensures efficient performance and improved thermal management. This technology enables the amplifier to handle demanding audio signals, contributing to a more dynamic and rich listening experience. Additionally, the amplifier features an adjustable low-pass filter, allowing users to easily tailor the output to match their specific audio setup and preferences. This is especially beneficial for those who want to integrate subwoofers into their system, as it helps in controlling the frequencies sent to the lower-end speakers.

Another notable feature is the amplifier's compact chassis, which not only aids in installation but also includes built-in protection circuits that prevent overheating and short circuits, ensuring long-lasting performance and durability. The KAC-6203 also includes a variable input sensitivity control, allowing for seamless integration with various head units and enabling users to optimize sound quality based on their source.

The KAC-6203 is designed with aesthetic appeal in mind, featuring a sleek black finish that complements most modern vehicle interiors. The overall build quality is robust, and the amplifier’s intuitive layout makes it easy to connect and adjust.

In summary, the Kenwood KAC-6203 is a versatile car amplifier that combines power, efficiency, and usability. With features like MOSFET power supply, adjustable filters, and reliable protection mechanisms, it stands out in the market as an excellent choice for anyone looking to enhance their car audio system without taking up too much space or budget. Whether you're upgrading existing speakers or installing a new sound system, the KAC-6203 delivers a significant audio improvement.
Top Page Image Contents