Installation procedure, 2CAUTION | Kenwood 526, KAC-726 specs

Installation procedure

1.Remove the ignition key and disconnect the negative - terminal of the battery to prevent short circuits.

2.Set the unit according to the intended usage.

3.Connect the input and output cables of the units.

4.Connect the speaker cables.

5.Connect the power cable, power control cable and grounding cable following this order.

6.Install the unit in the car.

7.Connect the negative - terminal of the battery.

2CAUTION

•Be sure to turn the power off before changing the setting of any switch.

•If the fuse blows, check cables for shorts, then replace the fuse with one of the same rating.

•Check that no unconnected cables or connectors are touching the car body. Do not remove caps from unconnected cables or connectors to prevent short circuits.

•Connect the speaker cables to appropriate speaker connectors separately. Sharing the negative cable of the speaker or grounding speaker cables to the metal body of the car can cause this unit to fail.

•After installation, check that the brake lamps, winkers, and wipers work properly.

Installation

Self-tapping screw (ø4 ⋅ 16 mm)

Installation board, etc. (thickness : 15 mm or more)

•Since the power amplifier has no parts which require operation, it can be installed at a position away from the driver’s seat without any hindrances.

As generally accepted positions for its installation, places such as inside the trunk, etc. can be considered.

•Use the extension cables. (Optional.)

Type

Length

0.5m

RCA cable

CA-2SL

CA-12SL

CA-22SL

CA-52SL

RCA cable (ø7mm)

CA-3WL

CA-13WL

CA-23WL

CA-53WL

RCA cable (ø12mm)

CA-5W

CA-15W

CA-25W

CA-45W

CA-65W

2CAUTION

•Do not install the unit under the carpet. Otherwise heat build-up occurs and the unit may be damaged.

•Install this unit in a location which allows heat to easily dissipate. Once installed, do not place any object on top of the unit.

•After installing the unit, check to make sure that electrical equipment such as the brake lamps, turn signal lamps and windshield wipers operate normally.

•Install the unit securely in a location that does not interfere with driving.

KAC-726, 526 specifications

The Kenwood KAC-726 is a notable amplifier that exemplifies the brand's commitment to high-quality sound performance. Designed for those who appreciate rich audio, the KAC-726 combines power, efficiency, and advanced technologies to enhance any sound system.

One of the standout features of the KAC-726 is its robust power output. Delivering a maximum power of 500 watts, this amplifier ensures that your audio experiences are not just loud, but also vibrant and dynamic. It boasts a continuous power output of 75 watts per channel at 4 ohms, making it suitable for driving multiple speakers with ease. This versatility allows users to customize their audio setup, whether it be for personal enjoyment or competitive sound quality.

The KAC-726 incorporates a Class D amplifier technology, which is known for its compact design and energy efficiency. This technology minimizes heat generation and power consumption while maximizing output power. As a result, the KAC-726 is not only compact and lightweight, but it also extends the lifespan of the unit and the connected speakers.

Additionally, the KAC-726 comes equipped with a built-in low-pass filter, allowing users to adjust the crossover frequency. This feature is essential for tailoring sound to the specific needs of different speakers, ensuring that each component of the system produces optimal sound quality. The variable low-pass filter can be adjusted from 50Hz to 200Hz, making it a versatile choice for various audio configurations.

The amplifier also includes built-in protection features, such as thermal protection and short circuit protection, safeguarding both the amplifier and speakers from potential damage during operation. This reliability is crucial for users who demand performance without compromising safety.

In terms of connectivity, the KAC-726 features easy-to-use terminal connections that facilitate straightforward installation. The amplifier is compatible with various audio sources, making it an ideal choice for enhancing factory systems or aftermarket setups.

Overall, the Kenwood KAC-726 is a powerful amplifier that marries modern technology with user-friendly features. Its combination of high power output, efficient Class D architecture, customizable filtering options, and built-in protection systems makes it an exceptional choice for audiophiles and casual listeners alike. Whether enhancing the audio experience in a car or a home setup, the KAC-726 stands out as a reliable and effective solution.