Pioneer AVH-P6400CD specs

Note:

•This unit is for vehicles with a 12-volt battery and negative grounding. Before installing it in a recre- ational vehicle, truck, or bus, check the battery voltage.

•To avoid shorts in the electrical system, be sure to disconnect the ≠ battery cable before beginning installation.

•Refer to the owner’s manual for details on connecting the power amp and other units, then make connections correctly.

•Secure the wiring with cable clamps or adhesive tape. To protect the wiring, wrap adhesive tape around them where they lie against metal parts.

•Route and secure all wiring so it cannot touch any moving parts, such as the gear shift, handbrake, and seat rails. Do not route wiring in places that get hot, such as near the heater outlet. If the insu- lation of the wiring melts or gets torn, there is a danger of the wiring short-circuiting to the vehicle body.

•Don’t pass the yellow lead through a hole into the engine compartment to connect to the battery. This will damage the lead insulation and cause a very dangerous short.

•Do not shorten any leads. If you do, the protection circuit may fail to work when it should.

•Never feed power to other equipment by cutting the insulation of the power supply lead of the unit and tapping into the lead. The current capacity of the lead will be exceeded, causing overheating.

•When replacing fuse, be sure to use only fuse of the rating prescribed on the fuse holder.

•Since a unique BPTL circuit is employed, never wire so the speaker leads are directly grounded or the left and right speaker leads are common.

•If the RCA pin jack on the unit will not be used, do not remove the caps attached to the end of the connector.

•Speakers connected to this unit must be high- power types with minimum rating of 50 W and impedance of 4 to 8 ohms. Connecting speakers with output and/or impedance values other than those noted here may result in the speakers catch- ing fire, emitting smoke, or becoming damaged.

•When this product’s source is switched ON, a control signal is output through the blue/white lead. Connect to an external power amp’s system remote control or the car’s Auto-antenna relay control terminal (max. 300 mA 12 V DC). If the car features a glass antenna, connect to the anten- na booster power supply terminal.

•When an external power amp is being used with this system, be sure not to connect the blue/white lead to the amp’s power terminal. Likewise, do not connect the blue/white lead to the power ter- minal of the auto-antenna. Such connection could cause excessive current drain and malfunction.

•To avoid short-circuiting, cover the disconnected lead with insulating tape. Especially, insulate the nused speaker leads without fail. There is a possi- bility of short-circuiting if the leads are not insu- lated.

•To prevent incorrect connection, the input side of the IP-BUS connector is blue, and the output side is black. Connect the connectors of the same col- ors correctly.

•If this unit is installed in a vehicle that does not have an ACC (accessory) position on the ignition switch, the red lead of the unit should be connect- ed to a terminal coupled with ignition switch ON/OFF operations. If this is not done, the vehi- cle battery may be drained when you are away from the vehicle for several hours. (Fig.1)

		CC
	F	A	O				F	O
	F		N				F	N
O	F					O	F
O					S	O				S
					S					S
					T					T
			T	R	A				R	A
			T	R				T	R
ACC position						No ACC position

Fig. 1

•The black lead is ground.Please ground this lead separately from the ground of high-current prod- ucts such as power amps.

If you ground the products together and the ground becomes detached,there is a risk of dam- age to the products or fire.

•Cords for this product and those for other prod- ucts may be different colors even if they have the same function. When connecting this product to another product, refer to the supplied Installation manuals of both products and con-

nect cords that have the same function.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

AVH-P6400, AVH-P6400CD specifications

The Pioneer AVH-P6400 and AVH-P6400CD are versatile multimedia receivers that combine advanced technology with superior sound quality, setting a high standard in the automotive audio industry. These models are engineered for those who prioritize both entertainment and connectivity on the road, ensuring a rich in-car experience.

A standout feature of the Pioneer AVH-P6400 series is its large 7-inch touchscreen display, which provides an intuitive interface for controlling various functions. The high-resolution display ensures that users can easily navigate through menus, manage settings, and enjoy video playback with exceptional clarity. The screen's responsiveness enhances usability, making it simple to switch between different audio and video sources while driving.

Both models come equipped with built-in Bluetooth technology, enabling hands-free calling and audio streaming directly from your smartphone. This feature ensures safe communication while on the move, allowing drivers to keep their attention on the road. The AVH-P6400 and AVH-P6400CD also support a wide range of audio formats, including MP3, WMA, AAC, and WAV, catering to diverse music preferences and enhancing playback versatility.

In terms of audio customization, these receivers come with a built-in 13-band graphic equalizer that allows users to fine-tune their sound according to personal taste. The advanced Sound Retriever technology restores lost sound quality in compressed audio files, providing a richer and more dynamic listening experience. Users can also leverage the adjustable crossover settings and high-performance amplifier to ensure optimal performance across various speaker setups.

For those who value multimedia capabilities, both models feature USB connectivity, enabling direct access to music files stored on USB devices. Additionally, compatibility with Apple CarPlay and Android Auto facilitates seamless integration with smartphones, allowing for easy access to navigation, messaging, and music apps right from the display.

Safety is also a priority with these receivers, as they include various features such as a customizable rear-view camera input, providing drivers with enhanced visibility while reversing. Overall, the Pioneer AVH-P6400 and AVH-P6400CD stand out for their rich feature sets, user-friendly interfaces, and exceptional audio performance, making them ideal choices for any audio enthusiast looking to transform their driving experience.