![](/images/new-backgrounds/1132176/13217667x1.webp)
Section
03
Operating this unit
Only frequencies lower than those in the se- lected range are outputted from the subwoo- fer.
Boosting the bass
Bass boost function boosts the bass level of sound.
1Touch BASS BOOSTER on the audio function menu.
2Touch c or d to select a desired level.
0to +6 is displayed as the level is increased or decreased.
Using the high pass filter
When you do not want low sounds from the subwoofer output frequency range to play from the front or rear speakers, turn on the HPF (high pass filter). Only frequencies higher than those in the selected range are output from the front or rear speakers.
1Touch HPF on the audio function menu.
2Touch d next to HPF to turn high pass
filter on.
# To turn high pass filter off, touch c.
3Touch c or d next to FREQUENCY to se- lect
Each time you touch c or d selects
Only frequencies higher than those in the se- lected range are outputted from the front or rear speakers.
3Touch SLA.
4Touch c or d to adjust the source vo- lume.
Each time you touch c or d it increases or de- creases the source volume.
+4 to
Notes
!The AM volume level can also be adjusted with source level adjustments.
!Video CD, CD, compressed audio and DivX are set to the same source level adjustment volume automatically.
!External unit 1 and external unit 2 are set to
the same source level adjustment volume automatically.
Adjusting source levels
SLA (source level adjustment) lets you adjust the volume level of each source to prevent ra- dical changes in volume when switching be- tween sources.
!Settings are based on the FM volume level, which remains unchanged.
1Compare the FM volume level with the level of the source you wish to adjust.
2Touch NEXT on the audio function menu.
34
En