Pioneer AVIC-D2 installation manual DIN Front/Rear-mount, DIN Front-mount

Installation

DIN Front/Rear-mount

This product can be properly installed either from “Front” (conventional DIN Front-mount) or “Rear” (DIN Rear- mount installation, using threaded screw holes at the sides of this product chassis). For details, refer to the fol- lowing illustrated installation methods.

Before installing this product

•Remove the holder.

To remove the frame, extend top and bottom of the frame outwards in order

to unlock it.

Loosen the screws (2.6 ⋅ 3 mm) to remove the holder.

Holder

Screw (2.6 ⋅ 3 mm)

DIN Front-mount

Installation with the holder and side bracket

1.Install the holder into the dash- board.

After inserting the holder into the dashboard, select and bend the tabs appropriate to the thickness of the dashboard material.

(Install this product as firmly as possi- ble using the top and bottom tabs. To secure this product, bend the tabs 90 degrees.)

Dashboard

182

111

Holder

2. Install this product and fasten the screws.

Dashboard

Screw (2.6 ⋅ 3 mm)

3.Attach the frame if applicable.

When attaching the frame, attach it with the grooved side pointing down- wards.

Attach the frame with this part facing down- wards.

21