Pioneer DEH-600BT operation manual Deleting preset numbers, Calling a number in the preset list

	Section
Operating this unit	02

#You can scroll literal information by pressing and holding DISP.

#If you want to go back and select another entry, push MULTI-CONTROL left.

10Press MULTI-CONTROL to store the phone number in the preset list.

Deleting preset numbers

1Press LIST to display DIAL PRESET (pre- set number list).

Refer to Using the phone number list on page

2Turn MULTI-CONTROL to switch preset

numbers.

# Press and hold DISP to scroll the phone num-

ber.

# If the phone number is already in the phone book, the corresponding name is displayed.

In this case, press and hold DISP to scroll the

name.

# You can also change the preset phone num- ber by pushing MULTI-CONTROL up or down.

3Press MULTI-CONTROL to select a preset phone number that you want to delete.

4Press and hold MULTI-CONTROL to dis- play MEMORY.

Push MULTI-CONTROL up or down to switch

MEMORY (memory) and DELETE (delete).

# About assigning , Assigning preset numbers on the previous page.

5Select DELETE and then press

MULTI-CONTROL to delete the preset phone number.

Calling a number in the preset list

After finding the number you want to call in the preset list, you can select the entry and make a call.

1Press LIST to display DIAL PRESET (pre- set number list).

Refer to Using the phone number list on page

2Turn MULTI-CONTROL to select the

phone number.

# Press and hold DISP to scroll the phone num-

ber.

# If the phone number is already in the phone book, the corresponding name is displayed.

In this case, press and hold DISP to scroll the

name.

# You can also change the phone number by pushing MULTI-CONTROL up or down.

3Press MULTI-CONTROL to make a call.

4To end the call, press .

Assigning preset numbers by using

MULTI-CONTROL

1Push MULTI-CONTROL up or down to switch preset numbers.

2Perform from step 4 to 10 of Assigning preset numbers on the previous page.

Calling number in the preset list by using MULTI-CONTROL

1Push MULTI-CONTROL up or down to switch preset numbers.

2Press MULTI-CONTROL to make a call.

3To end the call, press .

Introduction to advanced operations

1Press MULTI-CONTROL to display the main menu.

2Use MULTI-CONTROL to select

FUNCTION.

The function menu is displayed.

Turn to change the menu option. Press to se- lect.

Operating this unit

En 31