Blaupunkt manual Chicago IVDM-7002 Control Unit

Chicago IVDM-7002 Control Unit

Input & Output Connections

*Caution

•DO NOT connect any speaker wires to the metal body or chassis of the vehicle.

•DO NOT connect the speaker common (-) wires to each other.

•Connect each speaker wire directly to each speaker terminal.

•All speaker common (-) wires must remain floating. ie - no common connections or connection to vehicle ground.

•Connect each pair of speaker leads only to a single speaker (or speaker system) that has an impedance of at least 4 ohms, as well as a 50-watt power-handling capability.

•DO NOT connect speaker leads to any inputs on external amplifiers. This will cause damage to the internal amplifier of this unit.

Control Unit

Sirius input	or	Sirius Cable Required (7 607 001 606)
Blaupunkt	Signal	1m 13 Pin Male/Male DIN Cable
Controller	Connection

Fuse	12 V Constant
(Yellow)
(Black)	Ground
(Brown/White)	Twin CDC Remote (Turn-On)
	Max. 100mA
(Purple/White)	Reverse (+)
(Orange)	Navi-Mute (–)
(Blue)	Power Antenna
	Max. 100mA
(Blue/White)	System Remote (Turn-On)
	Max. 100mA
(Black)	+
	Center Speaker*
(Black/White)	–
(White)	+
	Front Left Speaker*
(White/Black)	–
(Gray)	+
	Front Right Speaker*
(Gray/Black)	–
(Green)	+
	Rear Left Speaker*
(Green/Black)	–
(Purple)	+
	Rear Right Speaker*
(Purple/Black)	–
	Center
	Rear Right
	Front Right	Audio
		Preamp
	Front Left	Outputs

Rear Left

Subwoofer

Monitor 2 Video Output

Monitor 2 Audio Output

Aux 2 Video Input

Aux 2 Audio Intput

Antenna Input

Aux 1 Audio Input

Aux 1 Video Input

Monitor 1 Audio Output

Monitor 1 Video Output

AUX 3 Video Input

AUX 3 Audio Input