01Before You Start
Tuner | 07 |
1SRC/PWR
During waiting mode, briefly press it to turn on the unit; during working status, briefly press it to select radio mode or playback mode/ press and hold it to turn the unit on or off.
2BAND / + (Bands selector / Increase) Button During radio mode, press it to select bands, press and hold REL until ANGLE appears to adjust angle backward.
3MUTE / - ( Mute / Decrease ) Button Briefly press it to mute; press and hold it to switch to the night mode; press and hold REL until ANGLE appears to adjust angle forward.
4REMOTE Infrared Sensor
5SEL/MENU Button
Briefly press it to select the function; press and hold it to display the main menu.
6VOL + / VOL -
Press VOL + / VOL - to increase or decrease the volume, and pressing them will also be used to adjust Balance, Fade, Bass and Treble.
7REL Button
Briefly press it to slidedown the monitor, then you can insert or eject a disc or a SD card.
If you press and hold, the monitor shows ANGLE. Then press +/- to adjust angle.
8RES Button
Press it to set the unit to initial status.
9
(Eject) Button
Press it to eject a disc.
10Disc Loading Slot
Press REL first before you load the disc.
11Common SD Card Slot
MO/ST Selector
During radio status, you can press 6 ST button on the remote control to select MO- NO mode or STEREO mode.
Stereo reception is on when Stereo appears.
It is switched to MONO mode when Mono appears.
Note:
*It is only valid on remote control.
*Switch to MONO compulsively to improve the listening quality when week signal.
*It is only valid in FM.
AMS
During radio status, briefly press 4 AMS button on the remote control to scan each stored station 6 seconds respectively which are stored in 23 Number Buttons (from 1
to 6). When you can press the corresponding Number Buttons or AMS button when your desired station is on, it will stop on that station.
When you press and hold 4 AMS button for more than 2 seconds, it will automatically activate the memory storing function. The radio automatically selects a station and has it stored in any one of the 23 Number Buttons (from1 to 6).
Note:
*The unit can store up to 6 stations for each band.
* Pressing 7 in the monitor also performs
the same function.
Number Buttons
During radio status, press Number Buttons to receive the stored stations.
During radio status, Number Buttons
(from 1 to 6) 23 can help you store yo- ur favorite station. You can follow the steps as below:
1When turned to a station,press and hold any one of the Number Buttons (from 1 to 6) until the number app- ears on the LCD, which indicates that station is already stored in the corresp- onding number button.
2Press and hold another number button more than 2 seconds when listening in a station in one number button
s, the station will be stored in that number button.
Note:
* Pressing 5 in the monitor performs the same function.
On Screen Display
During radio status, briefly press 8 OSD
to display the edition information. The preset frequency displays as the default setting.
Goto FREQ
Press 2 GOTO, and the monitor shows FREQ. Then press the number to input the valid frequency as 100.00,. The program will then be played.
Note:
*It is only valid on remote control.
*It is only valid when GOTO FREQ is ON in main menu.
8 | 37 |