Boss Audio Systems BV7300 manual Setup, TV System, Screen Saver, PS PAN Scan, Letter BOX

Setup

In DVD mode, when the disc is playing or in stop mode, press SETUP button to enter the Setup menu.

1.When the cursor is in the upper part of the menu, use / buttons to move between the different pages.

2. Press button to move the cursor to the setup page below. Then you can use the

/ buttons to move between the different setup options.

3.Press or the ENTER button to move to the choice list of each setup option, and then use / buttons and ENTER button to adjust your selection.

4.When the setting is complete, press SETUP button to return to normal mode.

*When settings are changed, old settings are overwritten. Make note of the current settings before making changes. If the ve- hicle’s battery is disconnected, the settings will be cleared and will return to the factory settings when power is next applied.

System setup

When you first open the setup menu, you will see the System Setup page:

TV SYSTEM

TV SYSTEM is used to select the TV output mode. This player can play discs recorded in either PAL or NTSC formats.

Select NTSC format when the unit is con- nected to an NTSC TV.

Select PAL format when the unit is con- nected to a PAL TV.

You can also choose AUTO SELECT, which will sense the type of monitor at-

tached to the output and select NTSC or PAL as needed. If you know the type of monitor, you should choose the type in this menu rather than letting AUTO SELECT do it for you. This is because there may be an undesirable small delay and some flicker- ing of the screen during the AUTO-SELECT process.

SCREEN SAVER

Like a computer monitor, video screens can “burn in” if a still image is displayed too long on the screen. This unit features a “screen saver” which produces a moving image to avoid burn-in, if SCREEN SAVER is enabled in the Setup menu.

SETTING the TV TYPE

TV types can vary based on their aspect ratio. The common monitors fall into one of three categories: 4:3 (PS/Pan and Scan), 4:3 (LB /Letterbox) or 16:9 (Widescreen). Playing a video recorded in one aspect ratio on a monitor with a different ratio can result in some mismatches and undesir- able display distortion or cutoffs. Read the following to assist you in setting up the TV type:

4:3 PS (PAN SCAN)

Select this when connected to a conven- tional 4:3 size monitor. The picture will fill the entire TV screen. However, due to the mismatch in aspect ratio, parts of the movie at the extreme left and right sides will not be visible when playing a 16:9 format movie.

4:3 (Pan and Scan) format is the factory default setting for this player.

4:3 (LETTER BOX)

When you are playing a widescreen format video on a normal (4:3) monitor, the best

BV7300 User’s Manual - page 21