Sharp MD-MX30 MD Sleep operation, Simultaneous sleep and timer operation, Stand-By

Page 34

(Continued)

To confirm the timer setting:

Press the TIMER/DELETE button once.

●The turn-on time, the turn-off time will be displayed.

To cancel timer operation:

1While in the timer stand-by mode, press the ON/STAND- BY button to turn the power on.

2Press the TIMER/DELETE button repeatedly to turn off the timer, "f PLAY" or "f REC" will go out.

Caution:

In the following cases, the timer recording function will not work.

●When a MiniDisc has not been inserted.

●When a playback-only MiniDisc is inserted.

●When the MiniDisc you inserted is protected against acci- dental erasure.

●When there is no recording space left on the MiniDisc you have inserted (when the "TOC FULL" or "DISC FULL" message appears).

3 Press the SLEEP button to select the time.

(Maximum: 2 hours - Minimum: 30 minutes)

The amount of sleep time can also be changed during the sleep operation.

●2 hours-30 minutes → 30-minute intervals

SLEEP

4 The unit will enter the stand-by mode automatically after the preset sleep time has elapsed.

To cancel the sleep operation:

Press the SLEEP button repeatedly. "0:00" will appear and "SLEEP" will go out at the same time.

●The sleep operation will be canceled.

■Sleep operation

SLEEP

ON/

STAND-BY

The radio, CD and MiniDisc can all be turned off automati- cally.

1 Play the desired sound source.

2 Press the SLEEP button.

SLEEP

●If you do not need to change the time, the unit will enter the sleep mode automatically.

To confirm the remaining sleep time:

Press the SLEEP button.

Notes:

●Once the sleep time is set, it will remain the same duration until the setting is changed.

●The sleep functions of this unit cannot be used to control equipment connected to this unit. You must use the sleep functions of the other equipment, if it has them.

■Simultaneous sleep and timer operation

1Perform steps 1 - 9 on page 42, "Timer playback/Timer recording".

2Perform steps 1 - 3 of the "Sleep operation" on this page.

➀Timer playback (record) setting

 

➁Sleep timer setting

Timer playback

 

 

(record) start time

30 minutes - 2 hours

 

Desired time

Sleep operation will

End time

automatically stop.

 

33

Page 33 Page 35
Image 34
Page 33 Page 35
Contents MD-MX30 Special Notes Please retain this informationImportant Safeguards Near water for example, near a bathtub, washbowlContents AccessoriesGeneral PrecautionsVolume control Care of compact discsNames of Controls and Indicators Front panelDisplay window Rear panelRemote control Speaker section Antenna connection Preparation for USESpeaker connection Removing the speaker grilles Connecting the AC power cordDemo mode Speaker cushionWhen bright Lights up When dark Goes out Remote control To change the brightness of the displayPrecautions for battery use DimmerTo change the clock time To change the time display modeTo see the time display Press the MEMORY/ENTER buttonPre-programmed equalizer VolumeSound Control Extra bass X-BASSCompact Disc Operation CD playbackTo remove a MiniDisc Minidisc OperationMiniDisc playback Press the MD 06 buttonCue and review Convenient CD and Minidisc OperationsApss Auto Program Search System MD/CD 3 MD/CDCD H Apms Automatic Programmable Music SelectorClear CD H MD H Repeat and random play ModeTime Switching the time displayChanging the display during MiniDisc playback DisplayManual tuning Auto tuningPreset Preset tuningPreset memory scan Clear Memory EnterDisc writing TOC Minidisc RecordingDifferences from tape recordings About track numbersTo check the remaining time available for record- ing To cancel the operationRecording from a CD onto a MiniDisc One-Touch Editing To stop recordingTrack editing from a CD onto a MiniDisc Press the REC button To record without using One-Touch EditingApms recording from a CD onto a MiniDisc Press the CD 06 buttonTo record the track number while recording Recording from the built-in radio onto a MiniDiscCheck the recordable time by pressing the Display button What the editing function can do TIMER/DELETEMinidisc Editing To create a disc nameTo create a track name To erase a track nameJog dial To delete a character TIMER/DELETE NAME/TOC Edit 3 MD Memory EnterTo change disc names and track names To add a characterTwo consecutive tracks can be combined into one track When both tracks have a nameDivide Combine Press the MEMORY/ENTER button againMove Designated track can be moved to any desired positionTo erase tracks one at a time Erase All EraseTracks you want to erase can be erased one at a time All of the tracks you want to erase can be erased at onceJog dial 2 CD H Timer OperationTimer playback/Timer recording Tuner Band 2 AUXSleep operation Simultaneous sleep and timer operationSTAND-BY Connecting external units Using External UnitsHeadphones Listening to sound from an external unit Manual recordingWhat is a MINIDISC? Minidisc System Limitations TroubleshootingIf a problem occurs GeneralMiniDisc recording and playback Resetting the MicrocomputerRemote control Radio receptionSymbol Error MessagesError messages Meaning Remedy Number orMaintenance SpecificationsMemo Memo Where to Obtain Service What to do to Obtain Service Model Specific Section

MD-MX30 MD specifications

The Sharp MD-MX30 is a versatile mini disc player that showcases advanced technology and a compact design, aimed at providing high-quality audio experiences. Released in the late 1990s, the MD-MX30 quickly became popular among audiophiles and casual listeners alike, thanks to its cutting-edge features and user-friendly functions.

One of the standout features of the MD-MX30 is its MiniDisc technology, which offers superior sound quality compared to traditional cassette tapes and CDs. The MiniDisc format allows for digital recording, playback, and editing, making it a compelling choice for those who value flexibility in their listening experience. Users can easily record live performances, mix tracks, and create personalized playlists, all while enjoying crisp audio quality.

The Sharp MD-MX30 is also equipped with a built-in amplifier and a variety of equalizer settings, enabling users to customize their sound preferences. With options for preset EQ settings, users can tailor the audio output to enhance different genres of music, from classical to rock. This adaptability contributes to a rich listening experience that satisfies diverse taste.

In terms of connectivity, the MD-MX30 includes auxiliary inputs and outputs, allowing for seamless integration with other audio devices. Whether connecting to external speakers or collaborating with other audio equipment, this mini disc player supports a range of configurations. The device also features a headphone jack for private listening, ensuring users can enjoy music at any time without disturbing others.

A notable characteristic of the MD-MX30 is its compact and sleek design, making it an ideal choice for portable use. Weighing in at a lightweight, this mini disc player can easily fit in bags and backpacks, allowing users to take their music on the go. The LCD display provides clear track information and playback status, enhancing usability while being on the move.

In conclusion, the Sharp MD-MX30 MD is a noteworthy mini disc player that combines advanced technology with user-friendly features. Its superior sound quality, customizable audio settings, versatile connectivity options, and compact design make it an excellent choice for music lovers. Whether at home or on the go, the MD-MX30 delivers a reliable and enjoyable audio experience that continues to resonate with users even today.
Top Page Image Contents