Clarion VMA8582 owner manual Case of auto mode, Automatic Dimmer

Page 12

English

Dimmer

In case of auto mode

The factory default setting is auto mode.

This mode adjusts the screen brightness automatically according to the ambient brightness.

Owner’s Manual

POWER

FUNC WIDE

MENU

1.Press the MENU button.

Confirm that “AUTOMATIC DIMMER” is se- lected.

3.Adjust the screen brightness using the and

buttons so that you can see the screen with great ease at night time. (-60 to ± 0)

AUTOMATIC DIMMER

DIMMER SELECT

INPUT SELECT

PICTURE MENU

END

DOWN/UP MENU SELECT

2.Press the MENU button again.

The auto dimmer (dark level) display appears.

AUTOMATIC DIMMER

– 55

AUTOMATIC DIMMER

– 55

If you set the AUTOMATIC DIMMER level to ± 0, the screen brightness does not change.

Notes:

When the menu screen is displayed and “END” is selected in step 1 or a further operation is not performed for 10 seconds, the menu dis- play disappears automatically.

If you adjust the screen brightness so that the screen can be seen with great ease at night- time, the screen brightness will be adjusted automatically from the maximum luminance to the minimum luminance (the brightness at which the screen can be seen with great ease at nighttime).

(It is recommended to set the AUTOMATIC DIMMER level at -40 to -60.)

If you set the AUTOMATIC DIMMER level to

± 0, the screen brightness level will be fixed to the maximum luminance and the screen bright- ness will not change.

12 VMA8582 (U)

Image 12
Contents Mode demploi et manuel dinstallation Manual del usuario y de instlactiónZM-7000B Contents Table des matièresÍndice Precautions EnglishFeature Cleaning Cleaning the cabinet Cleaning the LCD panelDisplay Unit Display Unit Automatic DimmerManual Precautions on handling of the LCD panel Dimmer sensorControl Box Adjusting the volume Adjusting the volume of the built-in speakerOperation Selection of the screen mode size Selecting a screen display modeNormal Wide CinemaCase of auto mode DimmerAutomatic Dimmer Case of manual mode DimmerDimmer Select BrightnessAutomatic Manual Select Menu SETPicture Adjustment Example Adjusting the black levelPicture Menu Black LevelPicture Adjustment Selecting picture adjustment itemsPAL mode Ntsc modeBlack Level Television Broadcast System PAL/NTSC Setting PAL/NTSC SelectPicture Menu END DOWN/UP Menu Select PAL/NTSC Select NtscConnection of External Equipment Connection ExampleSetting Example Input SelectNavigation OtherCamera TV TunerVideo Troubleshooting Symptom RemedySpecifications GeneralControl Box Display UnitWarranty card attached separately When repair is requiredOn fluorescent tubes