OHMD74 Final Manual.qxd 6/17/2004 5:33 PM Page 9
Disc Playback
DVD playback will often begin automatically when the disc is inserted. With some DVD
discs, you will need to press [ENTER] or [
] to begin playback.
Stopping Playback
There are two ways to stop playback: Pressing [ 
] once will stop playback, and the OHMD74 will store the location last played on the disc. Playback can be resumed at the same point on the disc by pressing [
]. Pressing [ 
] twice will stop playback and clear the OHMD74 memory of the last point played on the disc. Pressing [
] at this point will cause the OHMD74 to begin playback from the beginning of the disc.
Selecting a Track or Chapter
Selecting tracks or chapters can be accomplished by either using the IR remote or front mounted controls. These controls allow the operator to skip over undesired tracks or repeat a particular track.
Advancing Tracks / Chapter: Press the insert up arrow until desired track / chapter is found.
Repeating Previous Tracks / Chapter: Press the insert down arrow until desired track / chapter is found.
Note: For some VCD 2.0 discs, the insert up arrow and insert down arrow functions may not be available.
9