Safety Instructions

Dell™ 2000FP Color Display

Quick Setup Guide

Observe the following safety guidelines when connecting and using your display:

•Be sure that your display is electrically rated to operate with the AC power available in your location.

•Locate your display near an easily accessible electrical outlet.

•Place the display on a solid surface and treat it carefully. The screen can be damaged if dropped, sharply hit, or touched with a sharp or abrasive implement.

•Put your display in a location with low humidity and a minimum of dust.

•Never use your display if the power cable has been damaged. Do not allow anything to rest on the power cable, and keep the cable away from where people could trip over it.

•Never insert anything metallic into the display openings. Doing so may create the danger of electric shock.

•To avoid electric shock, never touch the inside of the display. Only a qualified technician should open the display’s case.

•Be sure to hold the plug, not the cable, when disconnecting the display from an electrical outlet.

•Openings in the display cabinet are provided for ventilation. To prevent overheating, these openings should not be blocked or covered. Also, avoid using the display on a bed, sofa, rug, or other soft surface. Doing so may block the ventilation openings in the bottom of the cabinet. If you put the display in a bookcase or some other enclosed space, be sure to provide adequate ventilation.

•Do not expose the display to rain or use it near water. If the display accidentally gets wet, unplug it and contact an authorized dealer immediately. You can clean the exterior of the display with a damp cloth when necessary, but be sure to unplug the display first.

•If your display does not operate normally—in particular, if there are any unusual sounds or smells coming from it—unplug the display immediately and contact an authorized dealer or service center.

Connecting Your Display to a Computer

DVI

D-Sub

1.Turn off your computer and unplug your computer’s power cable.

2.Connect either the digital DVI-D or the analog D-SUB display connector cable to the corresponding video port on the back of your computer. Do not use both cables on the same PC. The only case in which both cables can be used is if they are connected to two different PCs with appropriate video systems. (The graphics are for illustration only. System appearance may vary). Tighten the connector screws finger-tight. Do not overtighten.

3.Fully insert the display power cable into the power port on the back of the display.

4.Plug the power cables of your computer and your display into a nearby electrical outlet.

5.Turn on your computer and display. If the display does not display an image, refer to the troubleshooting section of this guide.

Dell 2000FP Color Display Quick Setup Guide

2000FP specifications

The Dell 2000FP is a notable flat panel display that was released as part of Dell's commitment to providing high-quality monitors that cater to a diverse range of users, from casual home workers to serious professionals. This 20-inch LCD monitor gained popularity for its impressive features and innovative technologies, marking a significant step in the evolution of display technology in the early 2000s.

One of the standout features of the Dell 2000FP is its native resolution of 1600 x 1200 pixels, which allows for stunning clarity and detail, particularly appreciated in graphic design, photo editing, and other visually intensive tasks. The monitor supports a 4:3 aspect ratio, offering a comfortable viewing experience for users accustomed to standard screen dimensions.

The Dell 2000FP employs advanced LCD technology, which provides a brightness level of around 250 cd/m² and a contrast ratio that enhances color depth and image fidelity. With a response time of approximately 25 ms, it is capable of handling standard multimedia tasks effectively, although it may not be ideal for fast-paced gaming applications that require instantaneous responses.

In terms of connectivity, the 2000FP is equipped with various input options, including VGA and DVI ports, allowing users to connect it easily to a range of devices and computer systems. This flexibility ensures compatibility with a wide array of graphics cards and laptops, making it a versatile choice for any workstation.

Moreover, the Dell 2000FP incorporates ergonomic design features, such as tilt and height adjustment capabilities, enabling users to customize the monitor’s position according to their comfort preferences. This is especially beneficial for prolonged use, reducing the risk of neck strain and eye fatigue during extended working hours.

The monitor's sleek design, featuring thin bezels and a sturdy stand, complements modern workspace aesthetics while showcasing Dell's commitment to both functionality and style. As an addition to any office environment, the 2000FP delivers reliable performance with an emphasis on user comfort and productivity.

In conclusion, the Dell 2000FP stands out as an exemplary display from its era, combining robust performance, versatile connectivity, and ergonomic design, making it a practical choice for users seeking a reliable and efficient LCD monitor. While newer technology has since emerged, the legacy of the Dell 2000FP remains a testament to the foundations of modern display innovations.