Installing Options
This unit allows the mounting of an optional DVD player or Hard Drive, not provided with this model.
NOTE: Before installing any options, ensure that the Power to the Monitor is Off and that the ignition key is Off.
1. Open the monitor and remove the protective cover from the monitor.
LCD Screen Side
Removal Assist
Front of Monitor
Locking Tabs (4)
2.Store the protective cover in an area where it will not be damaged.
3.Insert the optional DVD player or Hard drive as shown below.
NOTE: The illustration below shows a typical monitor with the DVD player option.
Lock/Unlock | Electrical |
Insert DVD Player and then slid down until unit locks.
4. Refer to the manual that came with your option for operating instructions.
16 | © 2005 Directed Electronics, Inc. |
|