HOW TO USE THE BUILT-IN TIMER
●Before setting the timer, make sure that the clock setting is correct. (Page 6)
(Main unit operation)
POWER | TIMER/ | |
ON/ |
| SLEEP Timer set indicator |
| ||
TUNER |
| |
(BAND) |
| |
| CD |
|
TAPE |
| |
(1 | 2) |
|
VIDEO/ |
| |
AUX | MEMORY/ | |
|
| |
TUNING/ | SET | |
TIME |
|
|
( ) |
|
|
3
4
5
■Timer playback
1 Press the
2 Press the CD, TUNER (BAND), TAPE (1V2) or VIDEO/AUX button to select the desired function.
3 Press the TIMER/SLEEP button repeatedly until a white "f" is displayed.
●The timer set indicator will flash.
4 Press the TUNING/TIME (X or W) button to set the hour start time, then press the MEMORY/SET but- ton.
5 Press the TUNING/TIME (X or W) button to set the minute start time, then press the MEMORY/SET but- ton.
●The power will be automatically turned off, and the timer set indicator will light up.
6 When the preset time is reached, the volume will increase gradually until it reaches the volume you were listening to before turning off the unit.
7 If you select CD or TAPE, the power will be turned off after the tape or CD is finished playing back.
If you select TUNER or VIDEO/AUX, the power will be turned off one hour later.
Note:
●When performing timer playback using an external unit connected to the VIDEO/AUX jacks, only the power of the main unit will be turned off automat- ically. (The power of the external unit will not be turned off.)
■Timer recording
1 Press the
●Load a cassette for recording into the TAPE 2 cassette com- partment.
2 Press the TUNER (BAND) or VIDEO/AUX button to select the desired function.
3 Press the TIMER/SLEEP button repeatedly until a red "f" is displayed.
●The timer set indicator will flash.
4 Press the TUNING/TIME (X or W) button to set the hour start time, then press the MEMORY/SET button.
5 Press the TUNING/TIME (X or W) button to set the minute start time, then press the MEMORY/SET button.
●The power will be automatically turned off, and the timer set indicator will light up.
6 When the preset time is reached, the timer recording will start.
●The volume will increase gradually until it reaches the volume you were listening to before turning off the unit.
7 When the recording tape reaches its end, the timer recording will end, and the power will be turned off.
To cancel timer operation:
Press the
To change the programmed contents:
Start again from step 1.
Note:
●Once the time is set, the setting will be retained until a new time is entered.
■Sleep operation
The radio, compact disc and cassette deck can all be turned off automatically.
1 Play back the desired sound source.
2 Press the TIMER/SLEEP button repeatedly until "SLEEP" is displayed.
To change the sleep time:
While the sleep time is displayed, press the TUNING/TIME (X or W) button to adjust the time.
(Maximum: 3 hours - Minimum: 1 minute)
The amount of sleep time can also be changed during the sleep operation.
●3 hours - 5 minutes →
●5 minutes - 1 minute →
3 Press the MEMORY/SET button.
4 The unit will turn off automatically after the preset sleep time has elapsed.
Note:
●Once the sleep time is set, it will remain the same duration until the setting is changed.
To confirm the remaining sleep time:
Press the TIMER/SLEEP button.
To cancel the sleep operation:
Press the
14