JVC TM-A13SU-W, TM-A13UCV manual Rear View, BNC connector, Video signal input terminal

REAR VIEW

<Rear Panel>

[TM-A13SU / TM-A13SU-W]

	VIDEO
A	B
IN	IN
	Y/C IN
OUT	OUT

AUDIO

A B

IN

OUT

[TM-A13UCV]

	VIDEO
A	B
IN	IN
OUT	OUT

To AC outlet

(120 V AC, 50/60 Hz)

	VIDEO		AUDIO
A	B	A	B
IN	IN
	Y/C IN	IN
OUT	OUT	OUT

(Rear view of TM-A13SU shown)

15 Video A terminals [VIDEO A IN/OUT]

Video signal input (IN) and output (OUT) terminals. The output terminal is bridge-connected.

IN : Video signal input terminal

OUT : Bridge-connected video signal output terminal

Notes:

17 Audio A terminal [AUDIO A IN/OUT]

(TM-A13SU and TM-A13SU-W only)

Input (IN) and output (OUT) terminals for the audio signal corresponding the VIDEO A terminals %. The output terminal is bridge-connected.

IN : Audio signal input terminal

OUT : Bridge-connected audio signal output terminal

Notes:

*For corresponding audio signals, use the AUDIO A terminals &.

*There is no AUDIO A terminal on the TM-A13UCV. It is only available on the TM-A13SU and TM-A13SU-W.

*Also refer to the Basic connection Example on page 11.

16 Video B terminals [VIDEO B IN/OUT]

[ BNC connector ]

Video signal input (IN) and output (OUT) terminals. The output terminal is bridge-connected.

IN	: Video signal input terminal
OUT	: Bridge-connected video signal output terminal

[ Y/C connector ] (TM-A13SU and TM-A13SU-W only) Y/C (S-Video) signal input (mini-DIN 4-pin connector) terminal.

Y/C IN : Y/C signal input terminal.

Notes:

*For corresponding audio signals, use the AUDIO B terminals *.

*There is no Y/C terminal or AUDIO B terminal on the TM-A13UCV. They are only available on the TM-A13SU and TM-A13SU-W.

*There is no Y/C (S-video) signal output terminal.

*When both VIDEO B terminals are connected (input) at the same time, the Y/C terminal is given priority.

*Also refer to the Basic connection Example on page 11.

*For corresponding video signals, use the VIDEO A terminal %.

*There is no AUDIO A terminal on the TM-A13UCV. It is only available on the TM-A13SU and TM-A13SU-W.

*Also refer to the Basic connection Example on page 11.

18 Audio B terminals [AUDIO B IN/OUT]

(TM-A13SU and TM-A13SU-W only)

Input (IN) and output (OUT) terminals for the audio signals corresponding to the VIDEO B terminals ^. The output terminal is bridge-connected.

IN : Audio signal input terminal

OUT : Bridge-connected audio signal output terminal

Notes:

*For corresponding video signals, use the VIDEO B terminals ^.

*There is no Y/C terminal or AUDIO B terminal on the TM-A13UCV. They are only available on the TM-A13SU and TM-A13SU-W.

*Also refer to the Basic connection Example on page 11.

19 AC Inlet [AC IN]

Power input connector. Connect the provided AC power cord ) to an AC outlet (120 V AC, 50/60 Hz).

20 Power cord

Connects the provided power cord (120 V AC, 50/60 Hz) to the AC IN connector.

5