Jensen MVB85A Accessories, Overhead Dome Lights, Remote Sensor, Wireless Headphones Optional

Page 17

Overhead Dome Lights

The Dome Lights integrated into the MVB85A are controlled by a three position slide switch. Sliding the switch to the ON position will turn

the lights ON. The OFF position will prevent the lights from turning ON with the vehicle’s interior lighting, and the auto position will allow the

lights to turn ON and OFF with the vehicle’s interior lighting. Refer to the installation Guide for wire connections. Do not leave the vehicle

unattended with the dome light switch in the ON position, as this could result in a discharged battery.

Remote Sensor

The MVB85A incorporates an infrared sensor which relays signals from the remote control to allow the unit to be controlled simply by pointing

its remote control at the remote sensor eye.

ACCESSORIES

Wireless Headphones (Optional)

The MVB85A includes a built in infrared transmitter for use with wireless headphones (PN MMIRHS). Turning the Wireless Headphone switch ON will activate the internal IR receiver and the volume can then be adjusted separately with the controls on each headset. Any number of wireless headphones can be used, but all must be within direct line of sight from the transmitter. See the documentation accompanying your wireless headphones for more detailed information.

Wireless FM Modulator

The MVB85A is equipped with buit-in wireless FM Modulator*, that allows you to listen to the MVB85A audio signal by tuning your vehicle’s radio to the selected frequency, (88.3, 88.7, 89.1, 89.5, 89.9MHz). This feature is accessed by using the FM transmitter buttons on the remote (ON/OFF, Channel Select). Whenever the FM modulator is on, broadcast reception on the vehicles radio may be poor. Switching off the FM modulator will allow normal radio reception.

*Note: In certain areas where there are a large number of FM radio stations (e.g. large cities, urban areas), the reception of the FM signal from the overhead pod may not be satisfactory, resulting in static, distorted sound or signal bleed thru from strong local radio stations. This is not a defect in the product, but the result of a stronger local radio station overpowering the wireless FM transmitter in your overhead pod.

If wireless reception is unsatisfactory, an optional wired relay box (Audiovox P/N SIRSWB) can be installed which will improve audio quality. Please contact the installer if this is the case with your product.

17

Image 17
Contents MVB85A Overhead LCD Monitor With DVD Player Important Notice Features Three Position Dome Light Switch Controls and Indicators DiagramMain Function Description DVD disc insertion slotBattery Installation Remote Control OperationDisplay PowerAngle SubtitleZoom AudioMenu ReturnVolume Down Source NumbersEnter SetupRepeat Scan ForwardExiting the Setup Menu Settings and AdjustmentsUsing the Setup Menu TV Type Language for On-Screen DisplayTV Display Load Factory PasswordRating Playing DVDs Using the Repeat featurePlaying Audio CDs Selecting a TrackPlaying MP3 Discs Selecting a Play ModeSelecting Folders and Songs Skipping SongsTurning the MVB85A on or OFF Wireless Headphones Optional AccessoriesWireless FM Modulator Overhead Dome LightsAUX A/V Input Source FeatureRegional Coding DVD BasicsTypes of Discs the MVB85A will play Loading and Playing DiscsProblem Solution TroubleshootingProblem Solution NTSC/PAL Replacement Parts SpecificationsApplies to Jensen Mobile Video Products Month Limited WarrantyAudiovox Electronics Corp., Hauppauge, NY