Installation

1 - Monitor Bracket (KMB701)

2 - 1/4-20 Star Nut (KSN1420)

2 - 5/16" Nylon Spacer (KNS8516)

Factory Console

Mark Locations for Inserts

Accessories

8 - #8-32 Inserts

(KMSI832)

6 - #8 x 1/2"

Black Machine Screw

(KMSB832.5)

2 - #8 x 1"

Black Machine Screw

(KMSB8321)

Remove Factory Console

Remove the top section of the center console (This will help the wire routing process). Unsnap and remove the rear section of the factory center console. Disconnect the wire harness from the Lighter Plug and Radio Control Unit. Remove the (4) screws holding the factory Radio Control Unit into the rear section of the console(These controls will remount into the video console).

(The lighter plug will not be reused.)

Prepare Video Console

Press the video console into place up and against the rear of the console. Through the (4) holes located on the side of the video console, mark the location for the metal inserts (see picture to right). Remove the video console from the back of the factory console and drill a 3/16" hole at each of the previously marked positions. Install (4) supplied metal inserts into the previously drilled holes. Prepare the previously removed rear radio

controls by enlarging the four holes in the mounting tabs to 3/16”. Install (4) supplied metal inserts into the mounting tabs. Install the radio control unit to the inside of the video console using (2) supplied 1/2” machine screws through the upper holes on the video console. Install (2) supplied 1” machine screws through the bottom holes on the video console, through the 5/16” white nylon spacers and into the inserts in the rear radio controls.

Wiring and Connections

Route all wires and cable at this time. (see picture at right)

Install wiring and cables according to the instructions provided with electronic equipment.

Wiring and Connections

Installation of Video Console

Prepare the monitor for installation by sliding the small studded bracket into the back panel of the monitor. Run the monitor data cable through the rectangular-shaped hole in the video console and connect to the monitor. Slide the monitor into the console and secure using the (2) supplied star nuts. (Do not overtighten)

Reconnect the factory harness to the Radio Control Unit. Make sure that all other cables and sources are hooked up at this time. Press the video console into place up and against the rear of the console. (Make sure that no cables are pinched.)

Secure the video console to the factory console with the (4) supplied 1/2" machine screws. (don’t overtighten)

Final Steps

Reinstall all previously removed factory components and panels.

Turn on and test everything.

(If the system doesn’t work properly, recheck all connections and fuses.)

The install of the video system is now complete.

Rev 10-01-01	SK-EXNL1 Installed

SK-EXNL1 specifications

The Kenwood SK-EXNL1 is a premium kitchen appliance that showcases advanced technology and innovative features designed to elevate culinary experiences. This exceptional stand mixer is perfect for both amateur cooks and professional bakers, offering a combination of power, versatility, and user-friendly design.

One of the standout features of the SK-EXNL1 is its robust motor, delivering efficient mixing with a power output that can handle a variety of ingredients, from delicate egg whites to heavy doughs. This powerful motor ensures that users can achieve the desired consistency effortlessly, making it an indispensable tool for any kitchen.

The SK-EXNL1 is equipped with a flexible Planetary Mixing Action, which allows the mixing head to rotate in one direction while the beater rotates in the opposite direction. This unique feature enhances the mixing process by ensuring that ingredients are thoroughly combined, resulting in a perfectly blended mixture every time.

Versatility is another hallmark of the Kenwood SK-EXNL1. It comes with various attachments, including a dough hook, whisk, and mixing bowl, which cater to different culinary tasks. The ability to switch out attachments easily means that users can explore a wide range of recipes, from making bread and pastries to whipping cream and mixing batters.

The design of the SK-EXNL1 is not just about functionality; it also prioritizes user comfort and convenience. The mixer features an easy-to-use control panel with multiple speed settings, allowing cooks to choose the perfect speed for their specific needs. Additionally, a tilt-head mechanism provides easy access to the mixing bowl, facilitating seamless addition of ingredients during the mixing process.

Safety features are also integrated into the design, including a safety switch that prevents operation if the bowl is not properly locked in place. This ensures that both the user and the appliance are protected during use.

In summary, the Kenwood SK-EXNL1 is a powerful and versatile stand mixer that excels in performance and convenience. With its planetary mixing action, robust motor, a variety of attachments, and user-friendly design, it is an invaluable asset in any kitchen, making it easier than ever to create delicious baked goods and engaging culinary delights. Whether you're a novice cook or a seasoned baker, the SK-EXNL1 promises to enhance your cooking experience significantly.