3
Connecting the power cord
•Check first to make sure that the power cord you use is the correct type required for your area.
•The monitor has a universal power supply that allows operation in either 100/120 V AC or 220/240 V AC voltage area. No
•Plug one end of the power cord to the AC inlet, and plug the other end into an AC outlet.
•For units using 120 V AC:
Use a
•For units using 220/240 V AC:
Use a cord set consisting of
Power saving
The monitor will be switched to "power saving" mode by the control signal from the display controller, as indicated by the
Mode | LED light |
On | Blue |
|
|
Power saving | Amber |
|
|
The power saving mode will be kept until a control signal has been detected or the keyboard or mouse is activated. The recovery time from "power saving" mode back to "on" is around 3 seconds.
Display Data Channel (DDC)
To make installation easier, so long as your system supports the DDC protocol, the monitor is able to
English