System Settings

™

Press SETUP on the Remote Control to enter the system setting menu.

Current Item--General Setup Page--

Current Item

TV Display	Wide
Angle Mark	ON
OSD Language	ENG
Captions	Off
Screen Saver	ON
Last Memory	ON

Goto general setup page

On the Remote Control, press either the  UP or  DOWN or  LEFT or RIGHT arrow buttons to move to the desired menu item and press PLAY to select the menu item.

--General Setup Page--

TV Display	PS		4:3 PanScan
Angle Mark	ON		4:3 Letterbox
OSD Language	ENG	16:9
Captions	Off
Screen Saver	ON
Last Memory	ON

Goto general setup page

Set TV Display mode to the correct ratio:

•Press the  RIGHT arrow buttons to enter the sub-menu. If you want to set the screen to "WIDE", press the  DOWN arrow twice to move your selection until the "WIDE" item is selected, press ENTER to select.

•Press SETUP to exit these system settings.

NOTE: There are three (3) screen ratio modes available: 16:9 WIDE, 4:3LB (Letter Box) and 4:3PS (Pan Scan). Different disc formats will display different images depending on the screen setting and size used. Here is an example of the different screen ratio format.