Wayne-Dalton 8700 installation instructions Label Placement, Bolts and nuts, To 7/8

Page 14

Sound framing members

(3) 5/16”

Bolts and nuts

Horizontal track

Perforated angle

5/16”-18 x 1-1/4” Hex bolts must extend into the track to serve as a roller stop

Perforated angle bolted using (2) 5/16” x 1-5/8” hex head lag screws to ceiling member and parallel to door

 

3/4” To 7/8”

3/4” To 7/8”

 

Door edges

 

 

Horizontal tracks

 

25

Label Placement

 

Tools: Step Ladder

 

 

 

IMPORTANT: Using the illustration, attach the appropriate labels to the ap- propriate location on the section, as shown.

NOTE: The Spring Warning tag(s) are factory attached (one per spring).

NOTE: Because of different configurations, some labels may require minor relocations.

Factory Attached, Torsion spring tag(s) (one per spring)

IMPORTANT!

WHEN CONNECTING A TROLLEY TYPE GARAGE DOOR

OPENER TO THIS DOOR, A WAYNE-DALTON

OPENER/TROLLEY BRACKET MUST BE SECURELY

ATTACHED TO THE TOP SECTION OF THE DOOR, ALONG WITH ANY U-BARS PROVIDED WITH THE DOOR. THE INSTALLATION OF THE OPENER MUST BE ACCORDING TO MANUFACTURER’S INSTRUCTIONS AND FORCE SETTINGS MUST BE ADJUSTED PROPERLY.

Operator bracket label

Residential

warning label

HIGH SPRING TENSION CAN CAUSE SERIOUS INJURY OR DEATH.

DO NOT adjust, repair or remove springs or parts to which springs are connected, such as steel brackets, cables, wood blocks, fasteners or other parts of the counterbalance system.

Adjustments or repairs must ONLY be made by a trained door systems technician using proper tools and instructions.

DO NOT remove, cover or paint over this tag. Product user should inspect this tag periodically for legibility and should order a replacement tag from the door manufacturer, as needed.

WARNING

WARNING

Lift handles/gripping points are required on this door, located as spelled out in the installation instructions, even if the door is motor operated.

Failure to install and use these lift handles/ gripping points on this door can result in serious injury to fingers and/or hands, if placed in the opening between sections, when the door is operated manually.

Lift handles/gripping points are required on this door, located as spelled out in the installation instructions, even if the door is motor operated.

Failure to install and use these lift handles/ gripping points on this door can result in serious injury to fingers and/or hands, if placed in the opening between sections, when the door is operated manually.

WARNING

 

 

 

 

 

WARNING

The adjacent bottom corner bracket and

 

 

 

 

 

The adjacent bottom corner bracket and

all cable retention features including

 

 

 

 

 

all cable retention features including

milford pins, cotter pins, & clevis pins are

 

 

 

 

 

milford pins, cotter pins, & clevis pins are

under HIGH SPRING TENSION.

 

 

 

 

 

under HIGH SPRING TENSION.

Adjustments and repairs must only be

 

 

 

 

 

Adjustments and repairs must only be

made by a trained door systems

 

 

 

 

 

made by a trained door systems

technician, using proper tools and

 

 

 

 

 

technician, using proper tools and

instructions.

 

 

 

 

 

instructions.

DO NOT REMOVE, COVER OR PAINT OVER

 

 

 

 

 

DO NOT REMOVE, COVER OR PAINT OVER

THIS LABEL. PRODUCT USER SHOULD

 

 

 

 

 

THIS LABEL. PRODUCT USER SHOULD

INSPECT THIS LABEL PERIODICALLY FOR

 

 

Bottom section warning labels

 

INSPECT THIS LABEL PERIODICALLY FOR

LEGIBILITY AND SHOULD ORDER A

 

 

 

 

 

 

LEGIBILITY AND SHOULD ORDER A

REPLACEMENT FROM THE DOOR

 

 

 

 

 

REPLACEMENT FROM THE DOOR

MANUFACTURER AS NEEDED.

 

 

 

 

 

MANUFACTURER AS NEEDED.

14

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer,

refer to your local yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com

Page 13 Page 15
Image 14
Page 13 Page 15
Contents 8700 B l e O f C o n t e n t sParts Breakdown Important Safety Instructions Tools Required Side view Brackets RH/LHHeadroom Requirements LHR 203 mmPage Top Fixtures Tools Power drill,7/16 Socket driverStrut Attachment Step PlateBottom Section Lift HandleVertical Tracks Stacking SectionsTools Hammer, Step ladder, Tape measure Drawbar Operator BracketHorizontal Tracks/Q.I Flag Angles Follow the corresponding step belowEnd Bearing Brackets Horizontal Tracks/F.A. Flag AnglesCenter Bracket Tape measure, PencilTools Step Ladder Tools Step Ladder, 1/2 WrenchWinding Springs Tools Vice ClampsRear Back Hangs Check the door for levelTo 7/8 Label PlacementBolts and nuts Factory Attached, Torsion spring tags one per springInside Lock Tools Power drill, 7/16 Socket driver, Tape measureTools Power drill, 1/8 Drill bit, Tape measure Pull Down RopeMonthly Inspections Using an electric openerManual door operation Warranty Limited Warranty Model
Related manuals
Manual 18 pages 37.89 Kb

8700 specifications

The Wayne-Dalton 8700 is a prominent model in the lineup of sectional overhead doors, designed for both residential and commercial applications. Known for its exceptional build quality and wide range of options, the 8700 series has become a favored choice among homeowners and business owners alike.

One of the main features of the Wayne-Dalton 8700 is its innovative design, which combines an aesthetic appeal with functional performance. The door is available in several attractive styles and colors, allowing customers to customize their entryways according to their preferences. The optional window panels enhance natural light infiltration while adding an elegant touch to the overall appearance.

The 8700 series boasts a robust construction featuring a polystyrene insulation core that provides impressive thermal efficiency. The insulation not only helps in maintaining indoor temperatures but also contributes to energy savings, making it an environmentally friendly choice. The door’s R-value, which measures its thermal resistance, is rated up to 14.0, providing excellent insulation for various climates.

Durability is another hallmark of the Wayne-Dalton 8700. Constructed from heavy-duty steel, this door is built to withstand the elements and resist dents and corrosion. The finish can be selected with a baked-on polyester coating, offering long-lasting protection against wear and tear, ensuring the door retains its appearance over time.

In terms of technology, the Wayne-Dalton 8700 utilizes advanced manufacturing techniques to ensure consistency and quality in each product. The doors are engineered to operate smoothly with minimal maintenance. The torsion spring system provides a reliable and quiet operation, enhancing the user experience when opening or closing the door.

Safety features are also a priority with the Wayne-Dalton 8700. The door comes equipped with various options for safety sensors that detect obstructions, automatically reversing the door’s operation to prevent accidents. Additionally, the design includes pinch-resistant panel edges to protect fingers during operation.

Overall, the Wayne-Dalton 8700 stands out in the market for its balance of aesthetics, performance, and safety. Whether for home use or commercial applications, its combination of style, durability, and advanced technology makes it a top choice for those seeking a quality overhead door solution.
Top Page Image Contents