Rosen Entertainment Systems DA-7169 manual Precautions

Page 5

2 Installing the DA-7169 Monitor

Precautions

1This unit should be installed by a qualified service techni- cian.

2This product is designed to operate with a 12-Volt, negative ground battery.

3Disconnect the ground wire from the battery terminal before connecting this unit to the electrical system.

4Other products or accessories may have wires that are color-coded similarly to those for this unit. Refer to the electrical diagrams of any other products before installa- tion of the unit to avoid making wrong connections.

5To avoid short-circuiting the electrical system, use proper insulation and fastening materials.

6Do not connect the unit’s yellow wire directly to the battery terminal. Connect the unit’s red wire to the ACC of the ignition switch. Failure to connect the red and yellow wires properly may drain the vehicle’s battery.

7To avoid damaging the unit, use only the accessories supplied with the unit.

8 Do not install this product at an angle exceeding ±30°.

9Do not install this product in a position that may cause injury to passenger(s) during an accident.

Page 4

Image 5
Contents Page Table of Contents Before You Begin Important Notes Precautions Color Code Function Electrical ConnectionsSignal Connections Typical Wiring Diagram Open / Close Front PanelFrequently Used Buttons Remote Control UnitPrecautions Replacing the BatteryEjecting and Opening the Display Monitor Adjusting the Position of the MonitorOperating the In-Dash DA-7169 Color Display Monitor Selecting the Screen Size Adjusting Features of the Display MonitorChoosing Ntsc or PAL Display System Adjusting the VolumeMuting the Volume Selecting the Video Source Playing and Pausing the Disc PlayerSelecting the Audio Channel Turning On and Changing the Radio StationSelecting a Disc to Play Using the Play Back FeatureSelecting Preprogrammed Radio Stations Specifications