NAD owner manual Using the HTR L70 Remote Control, Specifications, Controlling the L70

Operation

USING THE HTR L70 REMOTE CONTROL

SPECIFICATIONS

•Controls up to 8 devices

•44 function keys

•Learns up to 352 commands

•Records up to 44 macros with a maximum of 64 commands each

•Configurable punch-through

•Key illumination with programmable timeout

•Upgradable

•Contains pre-programmed library of NAD remote codes for the L70.

The NAD HTR L70 is ready to operate the L70 receiver right out of the box, but it is really eight remotes in one. Each of the 8 Device Selector keys at the top of the handset can call up a new “page” of remote- control codes to be transmitted by the remaining 44 keys. You may “teach” codes from any infrared- remote-controlled component, regardless of brand, to any or all of these. Obviously, the most logical system is that you teach the codes from your DVD player to the “DVD” Device Selector “page,” your television’s codes to the “TV” “page,” and so on, but there is no required scheme: You may load any commands to any key on any page (see “Learning Codes From Other Remotes,” below).

The HTR L70 is already preprogrammed with a full complement of commands for the L70 receiver on its “AMP”, “TUNER” and “DVD” Device Selector page, and as well as with library commands to operate most NAD-brand DVD, CD, or TAPE components on the corresponding Device Selector “pages.” These default commands are permanent: Even if you teach the HTR L70 new commands to take their place, the underlying library commands remain in place and can easily be recalled should you add an NAD component to your system later (see “Delete Mode,” below).

NOTE

For use with the L70, it should not be necessary to re-program any keys on the HTR L70 “AMP” and “DVD” page. However, in order for the HTR L70 to control your specific NAD-brand components you may need to load one or more different code-libraries; see “Loading Code Libraries,” below.

CONTROLLING THE L70

The HTR L70 is divided into two main sections. Eight Device Selector keys at the top-“AMP”, “DVD,” “TV,” and so on-set the handset’s remaining keys to a “page” of commands to control a particular component. A Device Select key determines only what component the HTR L70 will command; it does not perform any function on the receiver. All of the remaining keys are function keys that can “learn” control codes from virtually any infrared remote controller, allowing you to teach the codes of your equipment, regardless of brand, to the HTR L70.

However, the HTR L70 is already preprogrammed to operate the L70. All of the function keys on the “AMP”, “TUNER” and “DVD” Device Selector “page” perform L70 functions. (The HTR L70 can also command many other NAD components, from its “CD” and “TAPE” pages.)

It is important to note that certain HTR L70 keys perform different functions depending on the selected Device Selector “page.” The colour of the Device Selector key-labelling corresponds to the labelling of the function keys. Most centrally, the orange “AMP” Device Selector “page” corresponds to the orange input-select labelling adjacent to the numeric keys: When the HTR L70’s “AMP” Device Selector page is active, these keys select the receiver inputs. Similarly, the red “DVD” Device Selector “page” corresponds to several red labels, the green “TV” page to green labels, and so on.

DEVICE SELECTOR

AMP TV

ON

CD DVD

OFF

TUNER CAB/SAT

TAPE VCR MACRO

PROGRAM CLEAR REPEAT

DVD CAB/SAT VCR

1 2 3

VIDEO 4

4 5 6

TUNER

7 8 9

EXT. 5.1

10+ 0 MUTE

TV/VIDEO /ZOOM

TEST

SLOW

PRESET

LEARN

CH VOL

PRESET RANDOM

SLOW

SURR.

MODE

TITLEMENU

AM FM

ENTER

SLEEP

DISP RTN

CHANNEL VOLUME

SURR. CENTER SUB

HTR L70

SVENSKA PORTUGUÊS ITALIANO ESPAÑOL NEDERLANDS DEUTSCH FRANÇAIS ENGLISH

25