T3 Rack Mount Kit Installation Instructions

8.Remove the feet from the bottom of the StorEdge T3 array.

9.Install the left mounting chassis on the bottom left side of the T3 array and secure with two 10-32 x 1/4-inch flat head screws.

10.Install the right mounting chassis on the bottom right side of the T3 array and secure with two 10-32 x 1/4-inch flat head screws.

11.Install the T3 array in the rack enclosure.

•Approach the rack enclosure with the rear of the array facing the rack enclosure.

•Make sure that the array is resting on top of the mounting flange on the left front mounting bracket.

•Slide the array all the way into the rack enclosure until it stops.

12.Secure the T3 array in the rack enclosure by tightening the two thumbscrews on the left and right chassis mounts.

SHP900096-000

04/13/05 Rev 2

Page 4 of 5