Item | Description |
|
|
Auto | Adjusting the “Auto Setup”. See “Adjusting Auto Setup” on page 14. |
|
|
| Open the “Management” submenu where you can select Brightness, |
Management | Contrast or the image position for further adjustment. See Adjustment in the |
| “Management” Submenu” on page 15. |
|
|
| Open the “Clock/Phase” submenu where you can select Clock or Phase for |
Clock/Phase | further adjustment. See Adjustment in the “Clock/Phase” Submenu” on |
| page 18. |
|
|
| Open the “Color” submenu where you can select Color Temperature, RGB |
Color | and Black Level for further adjustment. See Adjustment in the “Color” |
| Submenu” on page 19. |
|
|
| Open the “OSD Display” submenu where you can select H. position or V. |
OSD Display | position of the OSD display for further adjustment. See Adjustment in the |
| “OSD Display” Submenu” on page 21. |
|
|
Factory Recall | Recall |
|
|
| Open the “Languages” submenu where you can select one of the five |
Languages | languages for your preference in display OSD messages. See “Selecting |
| Language for Your Preference” on page 23. |
|
|
Exit | Clear and exit the OSD main menu. |
|
|
Selecting Items in the OSD Menu
To select items in the OSD “Main Menu”, you will use the ‘Up (△)’ or ‘Down (▽)’ buttons on the front panel of the display.
To select items in the OSD submenus, you will use all three, control buttons. To select a specific submenu, you shall use ‘Up (△)’ or ‘Down (▽)’ buttons to move forward or backward to the item to be adjusted, and then select it by press ‘Select’ button.
Adjusting the OSD Menu
Auto Setup
To perform the Auto Setup function you should follow the steps below:
1.
- 10 -