INSTALLATION INSTRUCTIONS
STAND BASE INSTALLATION
The monitor is supplied complete with a stand.If you prefer to wall mount the monitor, please follow the instructions on page 21 to remove the stand. Be sure to include the stand with the monitor if it is necessary to return the unit.
CAUTION •• Put the monitor on a stable surface.The monitor may cause injury or damage if it falls or is dropped.
•• Do not give a strong impact to the monitor.It may cause damage.
•• Unplug the monitor before removal or installation to avoid electric shock or damage.
<Installation>
1.Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.
2.Install the
3.Fix the monitor to the stand by using the screw. Once screw is securely fastened, push down the knob on the scew.
Push down knob on screw
Screw for
<Remove>
1.Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.
2.Pull up the knob of the scews, and remove the screws and the
<Stopper pin>
Please stand the monitor up. Push down on the top face of the stand while slowly pulling out the stopper pin on the back of the stand. Careful attention is required as the monitor is sprung loaded and may expand quickly when removing it.
Stopper pin
6