Planar PXL225 MW manual Wall Mounting Optional

WALL MOUNTING (OPTIONAL)

Refer to the instructions that come with the base mounting kit. To convert your LCD display from a desk-mounted to a wall-mounted display, do the following:

1.Verify that the Power button is turned Off, then disconnect the power cord.

2.Lay the LCD display face down on a towel or blanket.

3.Remove the Plastic Covers from the back of the LCD display.

4.Remove the four screws attaching the base (Screw dimension: M4 x 14mm).

5.Remove the Rubber Plugs from inside the four VESA screw holes.

6.Attach the mounting bracket from the VESA compatible wall mounting kit (100 mm x 100 mm distance).

7.Attach the LCD display to the wall, following the instructions in the wall-mounting kit.

NOTE: For use only with Wall Mount Bracket with minimum weight/load: 12kg.

100.0mm

21