Planar LA2250RTPW manual Vesa Mount for Your Monitor

Page 11

VESA Mount for Your Monitor

This monitor conforms to the VESA Flat Panel Mounting Physical Mounting Interface standard which defines a physical mounting interface for flat panel monitors, and corresponding with the standards of flat panel monitor mounting devices, such as wall and table arms. The VESA mounting interface is located on the back of your monitor.

To mount the monitor on a UL certified swing arm or other mounting fixture, follow the instructions included with the mounting fixture to be used.

100.0

100.0

6-M4

 

 

106.7

 

VESA

 

 

 

 

Mounting

100.0

 

Interface

 

 

!Warning!

Please select the proper screws!

The distance between the back cover surface and the bottom of the screw hole is 8 mm. Please use four M4 screws diameter with proper length to mount your monitor.

Please note: the mounting stand must be able to support at least 17.6 lbs (8Kg).

8

Image 11
Contents LA2250RTPW Page Table of Contents Usage Notice PrecautionsTouch Screen for LA2250RTPW Features includeIntroduction About LA2250RTPWPackage Overview Front View Bottom View InstallationProduct Overview Attaching the L-Brackets Side Mount For Your Monitor Customer -Supplied Panel Material Recommendations Vesa Vesa Mount for Your MonitorConnecting the Display Figure Optional Back Panel Controls User ControlsPlease note How to Use the OSD MenusMain OSD Menu On-Screen Display MenusAppendix TroubleshootingNo Signal Product Dimensions Frequencykhz Compatibility ModesTouch Screen Driver Installation LA2250RTPW Calibration Instruction Page LA2250RTPW Install Instruction Technical Support Cables and Accessories Technical SupportPlanar Systems, Inc