Lenovo L2262 manual Selecting a supported display mode, Pal

Selecting a supported display mode

The display mode the monitor uses is controlled by the computer. Therefore, refer to your computer documentation for details on how to change display modes.

The image size, position and shape might change when the display mode changes. This is normal and the image can be readjusted using automatic image setup and the image controls.

Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat Panel technology is inherently flicker-free.

Note: If your system has previously been used with a CRT monitor and is currently configured to a display mode outside the range of this monitor, you may need to re- attach the CRT monitor temporarily until you have re-configured the system; preferably to 1920 x 1080 at 60 Hz, which is the Native Resolution Display mode.

The display modes shown below have been optimized at the factory.

Table 2-3.Factory set display modes

Addressability	Refresh rate
NTSC	60Hz
PAL	50Hz
640x350	70Hz
640x480	60Hz，72Hz，75Hz
720x400	70Hz
800x600	56Hz，60Hz，72Hz，75Hz
832x624	75Hz
1152x864	75Hz
1024x768	60Hz，70Hz，75Hz
1280x720	60Hz
1280x800	75Hz
1280x1024	60Hz，70Hz，75Hz
1440x900	60Hz，75Hz
1600x900	60Hz，75Hz
1680x1050	60Hz
1680x1050	75Hz（only VGA)
1920x1080	60Hz

Chapter 2. 2-7