Front Panel Features

On-Screen Menu (continued)

SYSTEM CONFIGURATION SUBMENU

1Power Button

Turn the monitor on by pressing the power button. In the OFF state, the LED will shine red. The LED will shine green when the monitor is turned on.

2Input Select Buttons

Use the input select buttons to select the input to be displayed:

•Video

•S-Video

•YPbPr (SD/HD)

•VGA

•DVI

•SDI (SD/HD)

Each input automatically detects the applicable formats (See Compatible Input Formats – Page 8).

3On-Screen Menu Navigation Buttons

Use the Menu, ↑, ↓, and Select buttons to display and navigate the on-screen menu (See Main Menu and Navigation – Page 9).

Top Front Panel

Lower Front Panel

4User-Definable Function Buttons

Two user-definable function buttons can be used for direct access to various settings. Functions are assigned using the on-screen menu (See User- Definable Function Buttons – Page 15).

5Image Adjustment Knobs

Use the image adjustment knobs to adjust the following settings. Pressing each knob will display the current status of the corresponding control:

•Brightness (0-64)

•Color (0-64)

•Tint (0-64) [NTSC Only]

•Contrast (0-64)

6Tally Lights

Three tally LEDs (green, red, and yellow) are provided as general purpose indicators. Each LED can be individually controlled, providing multiple indications. Tally LEDs are controlled via the HD-15 connector on the rear panel (See Tally Interface –

Page 7)

Video Configuration Submenu

■Internal SMPTE Color Bars

Use to display internally generated SMPTE split-field color bars.

■User-Definable Function Buttons

Use the FUNCTION 1 and FUNCTION 2 menu items to define each function button on the front panel of the monitor. The following options are available for each button:

• DELAY		Enable and rotate amongst delay modes.
•	RATIO	Toggle between 4:3 and 16:9 aspect ratios.
• BACK		Rotate amongst marker backgrounds.
• CENTER		Enable/disable center marker.
•	MARKER	Enable and rotate amongst marker settings (choices depend on aspect ratio setting).
• MONO		Enable/disable monochrome mode.
•	CTEMP	Rotate amongst color temperature settings.
•	PTP	Enable/disable Pixel-to-Pixel mode.

FUNCTION 1 is set to RATIO by default.

FUNCTION 2 is set to PTP by default.

■Status Display

Use to enable on-screen display of input/format status in the upper-left corner of the screen.

■Saving and Loading User Configuration Presets

Use the SAVE CONFIG and LOAD CONFIG menus to save current settings to one of 6 presets, or load a preset. All monitor settings on the monitor are saved, including the image adjustment knob settings.

•Use the LOAD CONFIG menu to load one of presets USR1 – USR6. Factory default settings can also be loaded by selecting MFG. (Factory defaults cannot be overwritten.)

•Use the SAVE CONFIG menu to save the current settings to a preset from USR1- USR6.