Marshall electronic V-R231P-AFHD specifications Menu Functions

Page 4

DVI-I Connector

Pin#

Signal

Pin#

Signal

VGA/XGA Connector

PIN#

SIGNAL

PIN#

SIGNAL

1

RED

9

NC

2

GREEN

10

NC

3

BLUE

11

NC

4

NC

12

NC

5

GND

13

HSYNC

6

RED SHIELD

14

VSYNC

7

GREEN SHIELD

15

NC

8

BLUE SHIELD

 

 

7Menu Functions

1. Power On/Off Button with System Reset

1

T.M.D.S DATA 2-

16

HOT PLUG DETECT

2

T.M.D.S DATA 2+

17

T.M.D.S DATA 0-

3

T.M.D.S DATA 2/4

18

T.M.D.S DATA 0+

 

SHIELD

 

 

4

T.M.D.S DATA 4-

19

T.M.D.S DATA 0/5

 

 

 

SHIELD

5

T.M.D.S DATA 4+

20

T.M.D.S DATA 5-

6

DDC CLOCK

21

T.M.D.S DATA 5+

7

DDC DATA

22

T.M.D.S CLOCK

 

 

 

SHIELD

8

ANALOG VERT. SYNC

23

T.M.D.S CLOCK+

9

T.M.D.S DATA 1-

24

T.M.D.S CLOCK-

10

T.M.D.S DATA 1+

 

 

11

T.M.D.S DATA 1/3

C1

ANALOG RED

 

SHIELD

 

 

12

T.M.D.S DATA 3-

C2

ANALOG GREEN

13

T.M.D.S DATA 3+

C3

ANALOG BLUE

14

+5V POWER

C4

ANALOG HORZ SYNC

15

GND

C5

ANALOG GROUND

Illuminates Red when system power is present. Illuminates Green when monitor is ON.

System reset will also occur with Off/On cycle. Active Outputs require power to be applied.

All input signals appear as output signal. Analog output signals are buffered and amplified.

2. Source Selection Buttons

HDSDI - Digital Input for Standard Definition (SDI-270Mbs) or High Definition (HDSDI-1.43Gbs) Video - Composite NTSC or PAL. Composite video must comply to SMPTE-RS170A.

Images without color burst (Subcarrier) component may not display. S-Video- Y/C (Luminance + Chrominance) NTSC or PAL

YPrPb - Analog Component color difference signals for Standard Definition (YCrCb) or High Definition (YPrPb) VGA/DVI - Toggles between Analog PC or DVI-I connectors.

DVI - Digital or Analog Computer or Video Signals. Includes HDCP and can be used with HDMI originated signals via an adapter cable

3.Under Scan (Not Available for HD and PC Signals)

Displays scaled images without vertical and horizontal blanking applied. This function can only be used with Standard definition signals. SDI signals will display all data input with ancillary data appearing to the right of the image.

4. Aspect Ratio

Displays scaled images in three screen aspect formats. 4:3 used mainly for Standard definition

16:9 used mainly for HDTV images.15:9 or Fill Mode is indicated by illuminating both LEDs. This mode will fill the entire display screen regardless of the original screen aspect.

5. Pixel to Pixel Function

As the native LCD display of the V-R231P-AFHD is 1920 pixels wide by 1200 pixels high, it may be necessary to change the size of the image to fill the screen in the desired aspect. Pixel to Pixel mode bypasses the enlargement/shrink of this scaling function and displays the native incoming format.

For 525-NTSC/480P based images, pixel to pixel will appear as a 480h x 640w (4:3 aspect) or 480hx720w (16:9 aspect). For 625-PAL/576P based images, pixel to pixel will appear as a 576h x 640w (4:3 aspect) or 576w x 720h (16:9 aspect). For 1080 line HD based images, pixel to pixel will appear as 1080h x 1920w (16:9 aspect)

For 720 line HD based images, pixel to pixel will appear as a 720h x 1280w (16:9 aspect)

6. Color Temperature

The V-R231P-AFHD has four color temperature settings that adjust the color balance of the screen for varying ambient conditions. D-55 (5500K) - Simulates indoor incandescent light conditions.

D-65 (6500K) - Standard setting recommended by SMPTE and EBU. Simulates normal daylight conditions. D-75 (7500K) - Simulates bright daylight conditions.

User

When USER color temperature is selected, the color balance RGB Gain and Offset adjustments will be enabled. Use UP/DOWN/LEFT/RIGHT (Safe, Mark, Frame, Overlay) to access the desired adjustment parameter.

Left Line= Increase of Gain

Right Line= Increase of Bias

Center Line = D65 (Default)

Center Line = D65 (Default)

Right Line = Decrease of Gain

Left Line = Decrease of Bias

7. OSD

 

Use SELECT to enable the On Screen Display for input and function status.

 

Note that when turned off, a timeout of 8 seconds will pass before the display goes away.

SDI: 525i/60hz 4x3

 

8. BACKLIGHT Brightness

Holding OSD then tapping SAFE will toggle through 3 selections of backlight intensity.

High = 100% Backlight Brightness (approx. 250 cd/m2)

Med = 75% Backlight Brightness (approx. 188 cd/m2)

Low = 60% Backlight Brightness (approx. 140 cd/m2)

4

 

V-R231P-AFHD Users Guide

 

 

 

 

Image 4
Contents Warranty Features Electrical SpecificationsMechanical Specifications Product OverviewOperational Setup ConnectorsMenu Functions

V-R231P-AFHD specifications

The Marshall Electronics V-R231P-AFHD is a high-performance 23-inch professional LCD monitor designed for various applications, including broadcasting, production, and post-production. Its lightweight yet durable construction makes it an excellent choice for both studio and field environments. The monitor features a native resolution of 1920x1080 pixels, ensuring crisp and clear images that meet the demands of high-definition workflows.

One of the standout features of the V-R231P-AFHD is its ability to support various input formats, allowing for flexibility in connection with different video sources. It includes multiple input options such as HDMI, DVI, and 3G/HD/SD-SDI, which makes it compatible with a wide range of cameras, video switchers, and other equipment. This versatility ensures that users can seamlessly integrate the monitor into their existing setups.

The V-R231P-AFHD also excels in color accuracy, boasting an impressive color gamut and high dynamic range. This makes it particularly appealing for color-critical applications where precise color representation is essential. Additionally, the monitor features built-in scopes and waveform monitoring, enabling professionals to evaluate aspects such as luminance and chrominance effectively.

Another key characteristic of the V-R231P-AFHD is its robust viewing angles. The IPS panel technology provides wide viewing angles, allowing multiple users to view the display without significant color shift or loss of brightness. This feature is especially useful in collaborative environments, where multiple stakeholders may need to view the monitor simultaneously.

The monitor is designed with user-friendly controls, providing easy access to settings and adjustments. An intuitive menu system allows users to quickly navigate through various functions, including picture adjustments, settings for signal inputs, and calibration features to fine-tune the display to specific needs.

Lastly, the V-R231P-AFHD's design is complemented by its ability to handle high temperatures and humidity levels, making it a reliable choice for outdoor shoots or studios with varying conditions. Its energy-efficient design also contributes to lower operational costs without compromising performance.

In summary, the Marshall Electronics V-R231P-AFHD is a versatile, high-quality professional monitor that meets the needs of various video production environments, combining advanced technologies, user-friendly features, and durable construction for a comprehensive display solution.