Marshall electronic V-R171X-IMD-HDSDI IMD Configuration Submenu, Overview, IMD Protocol

Page 22

On-Screen Menu (continued)

IMD CONFIGURATION SUBMENU

Overview

The V-R171X-IMD-HDSDI features an In-Monitor Display (IMD) with the ability to display on-screen text and tally in three colors. IMD text, color, and alignment can be assigned to each screen locally using menu options (see below). Alternately, IMD text and tally can be remotely controlled via the RS-422/485 serial interface using several industry- standard protocols, including TSL v4.0 and Image Video. Multiple V-R171X-IMD-HDSDI monitors can be looped together and each addressed individually via the protocol. All menu features of the V-R171X-IMD-HDSDI can also be controlled via the Marshall Network Controller box using MEI protocol. (Contact Marshall Electronics for additional information).

Use the IMD Configuration submenu to configure various IMD parameters as described below.

IMD Configuration Submenu

IMD Protocol

Use the IMD Protocol menu option to choose the protocol with which the V-R171X-IMD-HDSDI receives remote commands. Currently, four protocols are available. Contact Marshall Electronics for the latest protocol compatibility.

Image Video

Use the Image Video protocol setting when controlling the IMD from an Image Video tally controller (e.g. TSI- 1000) or other controlling device which utilizes the Image Video protocol. The IMD #, IMD Name(S/N), and Baud Rate parameters must be set for each screen in conjunction with the controlling device.

TSL v4.0

Use the TSL v4.0 protocol setting when controlling the IMD from a TSL tally controller, or other controlling device which utilizes the TSL v4.0 protocol. The IMD # must be set for each screen in conjunction with the controlling device.

MEI

Use the MEI protocol setting when controlling the V-R171X-IMD-HDSDI using the Marshall Network Controller box. This protocol allows remote control of all features on the V-R171X-IMD-HDSDI, including marker setup, video configuration, system configuration, and image adjustments (brightness, contrast, etc.). The IMD #, IMD Group #, and Baud Rate parameters must be set in conjunction with the Network Controller Box.

MEI-Image Video

This protocol setting accepts Image Video commands via MEI protocol, for use when an Image Video controller is connected to the Marshall Network Controller box.

22

Image 22
Contents Operating Instructions Contents Features Product OverviewConnections, Power-On and Initial Setup Installation and Initial SetupInstallation UnpackingTop and Front Panel Features Power ButtonRear Panel Features RS-422/485 Serial InterfaceOn-Screen Menu Compatible Input FormatsStructure Overview On-Screen Menu Main Menu and NavigationMarker Setup Submenu MarkersMarker Background Marker Setup SubmenuCenter Marker Monochrome Mode Video Configuration SubmenuBlue-Only Mode Pixel-to-Pixel Mode Video Configuration SubmenuAspect Ratio Settings Curtain Color Red, Green, and Blue Offset Color Configuration SubmenuCtemp/Gamma Red, Green, and Blue GainGray Levels System Configuration SubmenuUser-Definable Function Buttons Save Defaults System Configuration SubmenuSaving and Loading User Presets Software Version DisplayDeinterlacer Mode Deinterlacer SubmenuDeinterlacer Submenu Film ModeFilm Indicator Motion DisplayIMD State OSD Configuration SubmenuStatus Display OSD Configuration Submenu OSD TallyTime Code LED TallyAudio Monitor Overview IMD Configuration SubmenuIMD Protocol IMD Configuration Submenu IMD Tally Mode Tally SourceService Submenu CRCSpecifications PanelScreen Cleaning MaintenanceWarranty Faceplate DustingMarshall ELECTRONICS, INC