Back View, Battery Installation | Audiovox HR7011PKG manual

REMOTE CONTROL WITH

WIRELESS GAME CONTROL OPERATION

2. Use the SELECT button (page up & page down) to display

the games (1-32). Then use the direction buttons to move the

arrow to the desired game. Press START to select the game.

DIRECTION KEYS

Back View

M1/M2

P1/P2

RESET

START

Battery Installation

SELECT

GAME/REMOTE SELECTOR SWITCH

BATTERY COVER

3.	A Key : “A Function Key” activates the jump and optional
	weapons.
4.	B Key : “ B Function Key” activates Bullet fire and attack.
5.	TA Key : TURBO “A” Function Key.
6.	TB Key : TURBO “B” Function Key.
7.	Press START to begin the game. Press START again at any
	time to pause the game.
8.	Return the GAME/REMOTE selector switch to the REMOTE
	position after use.

Two-Player Games

Before attempting to operate your remote control, install the batteries as described below:

1)Turn the remote control face down. Using a finger, slide battery cover off in the direction of the arrow.

2)Install three “AAA” batteries. Make sure that proper polarity (+ or -) is observed.

3)Align the cover tabs with the remote control and slide the cover until it locks.

The remote control will only operate the M1/M2 Monitors. It is not a universal remote control and will not control equipment from other manufacturers.

WIRELESS GAME CONTROLLER FUNCTIONAL DESCRIPTION

1.Position the GAME/REMOTE selector switch to the GAME position.

The game source can only be selected from the M1 Monitor. When playing two-player games, select the GAME source on the M1 Monitor and select the M1 source on the M2 Monitor.

When playing two-player games, use two remote controls and set the remote controls as follows:

Player 1 (M1 Monitor) sets their remote to Game/M1/P1 Player 2 (M2 Monitor) sets their remote to Game/M1/P2.

Single player games can be played on the M2 Monitor but the M1 Monitor must be turned on and set to the GAME source. You cannot watch a DVD on the M1 Monitor and play a game on the M2 Monitor. When playing a single player game on the M2 Monitor, set the remote control to GAME/M1/P1 and point the remote control to the M2 Monitor.