Installing the Battery Pack:
1.First, make sure the player is in “Stop” mode and that the AC power supply has been disconnected.
2.Close the player cover.
3.Align the guide pins on the battery witht the holes on the back of the unit. Push the battery towards the rear flank of the player until it locks into position. The lock position is indicated by a click. The unit will fit snugly to the player.
Figure 45. Installing the DVD Player Battery
Removing the Battery Pack:
1.First, make sure the player is in “Stop” mode and the AC power supply has been disconnected.
2.Press the release button on the left side of battery.
3.Pull the battery from the unit.
PRESS
Figure 46. Removing the DVD Player Battery
34