Audiovox VOH1042 DL owner manual Wired FM Modulator P/N FMM100, Video Output

Page 12

WIRED FM MODULATOR (P/N FMM100)

Your video system may be equipped with an optional RF modulator, that allows you to listen to the VOH1042 DL’s audio signal by tuning your vehicle’s radio to the selected frequency, (88.7 or 89.1- check with your installer) and tuning on the remote mounted RF modulator switch. (In most cases this toggle switch will be located underneath the driver’s side of the dash, check with your installer for the exact location.) Whenever the RF Modulator is ON, broadcast radio reception will be poor. Turning the remote mounted toggle switch OFF will allow for normal radio reception.

VIDEO OUTPUT

The VOH1042 DL provides a video output for an optional Video monitor(s). This output will provide a video signal that duplicates the signal displayed by the VOH1042 DL to an additional Monitor or Video display. Please see your installer for more information.

-11-

Image 12
Contents Overhead TV/MONITOR Important Notice C E P T I O NSafety Precaution FeaturesFront Panel Feature Front Panel Features See Figure Remote Control Operation Battery Installation Remote Controlled TV Functions Remote Controlled VCP Functions Channel Tuning Setup Turning the VOH1042 DL on and OFFOperation Overhead Dome LightsRemote Infrared SENSOR/REPEATER Optional Accessories Wireless HeadphonesAuxiliary A/V Stereo Inputs Jack Wired FM Modulator P/N FMM100 Video OutputTypical System Connections Troubleshooting Specifications Page Audiovox Electronics Corp., Hauppauge, NY 128-6331