CONTROL FUNCTION DESCRIPTION (FRONT VIEW)
8.Infrared Transmitter and Sensor
Transmits audio to wireless headphones. Also allows the remote control to operate the VOD128A and to control other accessories in the system.
9.Three Position Dome Light Switch ON – Turns on the dome lights.
OFF – The dome lights will not turn on in this position. AUTO – Automatically switches on the dome lights in conjunction with the vehicle's interior illumination.
10.Ventilation Openings
11.LCD Cut Off Switch
Used to turn off the LCD panel monitor when in the closed position.
12.LCD Panel
13.Screen Release
Press to release the screen.
14.USB 1.1 INPUT FOR USB THUMB DRIVE
15.SD Card Reader - Allows reading the contents (Audio, Photo, Video) data stored on the Secure Digital Card (SD Card).
The VOD128A has an option that allows the user to select from two IR transmit and receive codes (M1 or M2). This feature can be used when using two VOD128As in the same installation or if the vehicle has an RSA (Rear Seat Audio) that uses an “A” channel headset. The VOD128A comes factory set to M1. When in the M1 mode the unit will respond to remote commands when M1 is selected on the remote and will transmit audio on the A channel. When in the M2 mode the unit will respond to remote commands when M2 is selected on the remote and will transmit audio on the B channel.
Note:
Note:
OSD will appear on the screen for 4~5 seconds Selecting a Monitor Code (M1 or M2)
1.Power ON unit and waiting until M1 OSD appears, the M1 OSD will appear on the screen for 4~5 seconds. After the M1 OSD disappears, within 10 seconds press remote control
TV button and continue press code number 6353. It will change from M1 to M2.
2.To change the monitor code from M2 to M1, repeat the above instruction
FMM 88.3MHz | VIDEO 3 |
FMM OFF | DVD |
M1
M2
IRT ON
IRT OFF
5