11. Eject
DVD disc is stopped and ejected by pressing this button.
12. DVD Disc Insertion Slot
With the label surface up, gently insert the disc into the slot until the loading mechanism engages and the DVD disc is pulled into the unit.
13.Infrared Transmitter and Sensor
Used to transmit audio to wireless headphones. Also allows the remote control to operate the VOD1048 and to control other accessories in the system
14.Dome Lights
Provides additional interior illumination.
15.Three Position Dome Light Switch
·Auto Automatically switches on the dome lights in conjunction with the vehicle's interior illumination.
·Off … The dome lights will not turn on in this position.
·On … Turns on the dome lights. Do not leave the switch in this position as it will drain the vehicle battery.
16.Screen Release
Slide in direction of the arrow to release the drop down screen.
17.Side Remote Sensor Eye
Allows the remote control to operate the VOD1048 and control the other accessories.
18.Headphone Jack
Allows the use of wired headphones with a 1/8" plug for listening to video program audio.
19.Aux input jack
Auxiliary Audio input (Right and Left Channel) and Video input
20.Headphone jack
Allows the use of wired headphones with a 1/8" plug for listening to video program audio.
NOTE: Audiovox recommends the use of the Audiovox HP275 Headphones when using wired headphones.
B A T T E R Y IN S T A L L A T ION
Before attempting to operate your Remote Control, install the batteries as described below.
1)You can use your remote controller within a distance of 7~10m and an angle of 30 degrees from the left and right sides of the remote Sensor Eye of VOD1048.
2)Install two "AA" batteries as shown. Make sure that proper polarity (+ or
3)The remote control will operate the VOD1048 and most Audiovox VCP's. It is not a universal remote control and will not control equipment from other manufacturers.