OPTIONAL ACCESSORIES
WIRELESS HEADPHONES
The VOH1041DL includes a built in Infrared Transmitter for use with Audiovox Wireless Headphones (P/N MVIRHS). Turning the Headphone switch ON will activate the internal IR Receiver, the volume can then be adjusted using the controls on each headset. Any number of wireless headphones can be used, but all must be within a line of sight from the transmitter, as infrared transmissions, like visible light travel only in a straight line.
The VOH1041DL has a Jack labeled “to FM Transmitter”, this Jack is for connection of an optional Audiovox RF Transmitter (P/N WTXRF01). This Transmitter is for use with the Audiovox Wireless RF Headphones (P/N WHPRF01).
Consult the documentation accompanying the Audiovox Wireless Headphones for more information.
WIRED FM MODULATOR (P/N FMM100)
Your video system may be equipped with an optional RF modulator (Audiovox FMM100), that allows you to listen to the VOH1041DL’s audio signal by tuning your vehicle’s radio to the selected frequency, (88.7 or 89.1- check with your installer) and turning on the remote mounted RF modulator switch. (In most cases this toggle switch will be located underneath the driver’s side of the dash, check with your installer for the exact location.) Whenever the RF Modulator is ON, broadcast radio reception will be poor. Turning the remote mounted toggle switch OFF will allow for normal radio reception.
VIDEO OUTPUT
The VOH1041DL provides a video output for an optional Video monitor(s). This output will provide a video signal that duplicates the signal displayed by the VOH1041DL to an additional Monitor or Video display. Please see your installer for more information.