Power, Monitor Select, Source, System Menu

*Function control is available on the unit and the Remote Control.

**Function not available in this model.

1.POWER*

Press this button to turn the unit ON and OFF.

2.MONITOR SELECT

M1 Button – Set the remote control code to allow control of the unit in M1 mode.

M2 Button** – Set the remote control code to allow control of the unit in M2 mode.

3.SOURCE*

Each time the button is pressed, the unit will cycle through modes DVD, AV1/AUX

4.TV Mode Select

Switches certain function keys on the remote control for monitor functions.

5.DVD Source

This button is only active when remote control is in DVD mode.

6.PIX ( Picture Select )

Each time of this button is pressed, the OSD picture adjustment displays the “Adjustment bar” for BRIGHTNESS, CONTRAST, COLOR, TINT(For NTSC only) or RESET. Once the desired adjustment bar is displayed, use the VOLUME+/ –VOLUME– button to adjust the setting. The display will automatically turn off if no adjustments are made within 6 seconds.

7.SYSTEM MENU

Allow the user to access the system menu when the unit has been placed in TV mode ( See Item number 4 ). Press cursor (pq) buttons to select desired picture control FMM screen mode, OSD language and source default during power up.

8.CURSOR (pqtu)

Use these buttons to access menu selections on the screen.