Troubleshooting
PROBLEM |
| SOLUTION |
|
|
|
IR sensor | • | Verify that the batteries in the remote are fresh. |
inoperative | • | Verify that the remote sensor eye is not |
| obstructed. | |
|
| |
|
| |
Disc won’t play | • Insert a disc with the label side facing up. | |
| • | Check the type of disc you put into disc tray. |
|
| This DVD only plays DVDs, audio CDs and |
|
| MP3s. |
| • Both the unit and the disc are coded by region. | |
|
| If the regional codes don’t match, the disc can’t |
|
| be played. This DVD player is set to Region |
|
| Number 1. |
|
|
|
Play starts, | • | The disc is dirty. Clean it. |
but then stops | • Condensation has formed. Allow | |
| player to dry out. | |
immediately |
| |
|
| |
|
|
|
No sound or | • | Make sure your DVD is connected properly. |
distorted sound |
| Make sure all cables are securely inserted |
| • | into the appropriate jacks. |
| If you are using the IR headphones, make | |
|
| sure you turn on the IR headphone power. |
| • Make sure the Modulator is ON and the proper | |
|
| Frequency has been selected. |
|
|
|
24 | MMD85 |