I.PREPARATION OF VEHICLE INTERIOR
1.Remove the O.E.M. compartment console currently mounted to inner roof of vehicle. Remove (1) one # 8 X 1 3/4" screw from recess in front of console near rear view mirror. Pull front of O.E.M. console down to access wiring. Disconnect all wiring from console. Pull console forward to release rear retainers from inner roof recess near center of vehicle. Remove console and lay it in a safe place. See Figure 1.
FIGURE 1
2.Turn console over and place on a covered surface. Remove plastic molded assembly from cloth covered trim ring. Using a 7/64” drill bit, drill through the center of the (10) ten plastic pins which secure
console together. | See Figure 2. CAUTION: |
Do not drill deeper than 1/2" or you may drill through console in some areas. Using a small chisel, carefully remove the head of the (10) ten plastic pins. Unsnap the wiring connector secured to clip on trim ring and separate console from trim ring. See Fig. 2.
FIGURE 2
3