Hotkeys
1Auto/Exit
2</ECO
3>/Image Ratio
4Menu/Enter
5Power
Power
Press the Power button to turn on/off the monitor.
Menu/Enter
When the OSD is closed, press Source button will be Source hot key function. Press Source button continuously to select the input source showed in the message bar , press Menu/Enter button to change to the source selected.
>/ Image Ratio
When there is no OSD, press > continuously to change 4:3 or wide image ratio. (If the product screen size is 4:3 or input signal resolution is wide format, the hot key is disable to adjust.)
</ Eco
Press the Eco key continuously to select the Eco mode of brightness and DCR on when there is no OSD. ( Eco mode hot key may not be available in all models).
Auto/Exit
When there is no OSD, press Auto/Source button continuously about 3 second to do auto configure.
18