ZETA Music Systems manual Zeta Music Systems, Inc ZMC-200 Manual Rev2.0

Page 11

4.Press the + Parameter button, to get to the next Global parameter. Check to make sure that the parameter ”HOLD CHANNEL” is set to ”7.” Press the + Parameter button again and set the value for ”SEQ CHANNEL” to ”16” (+/- Value buttons) if the value is different than 16.

5.Press the + Parameter button to set the values for ”PBEND RANGE.” This value sets the maximum number of half-steps that are allowed when Pitchbend information is analyzed. When using the internal soundboard, set this value to 24 (two octaves).

6.Press the + Parameter button to get to ”SND PBENDRG.” If you are using the internal sound card of the ZETA SYNTHONY II, set this value to ”OFF.” If your MIDI instrument supports setting separate pitchbend parameters for each sound preset, set this value to ”ON” (+/- Value buttons). If in doubt, read the user’s manual of your MIDI instrument.

7.Press the + Parameter button to get to “LOCAL MODE.” If you are using the internal sound card of the ZETA SYNTHONY II, set this value to “ON”.

8.Press the + Parameter button to get to “ TUNE BASE.” Set this value to “0.”

9.Press the + Parameter button to get to “INSTRUMENT.” Now press the ENTER button to get to the submenu. At the prompt ”TYP:” use the +/- Value buttons to set the instrument you will be playing into your ZETA SYNTHONY II: “VIOLIN 4, VIOLIN 5, VIOLA, CELLO or BASS.

10.Press the + Parameter button to get to “NOTE OFF LIM.” Set this parameter to “15.

11.Press the Parameter button to get to “TRIG LEVEL.” Set this parameter to “4.”

12.Press the + Parameter button to get to “INPUT SENSE.” Press the + Parameter button to access each string sensitivity. Set each string to “20”.

You have now completed the basic settings and your ZETA SYNTHONY II is ready to be played. The changes you made have been automatically saved in static RAM so that they

6

ZETA Music Systems, Inc.

ZMC-200 Manual Rev2.0

Image 11
Contents Synthony Midi Controller Table of Contents Preset Mode TUTORIAL- Setting UP a Chain Appendix ZMC-200 Front Panel Utility Arpeggiator and Control ZMC-200 Rear PanelAbout the Synthony Quickstart Basic SettingsZeta Music Systems, Inc ZMC-200 Manual Rev2.0 Changing a Preset Sound Zeta Music Systems, Inc ZMC-200 Manual Rev2.0 About the User Interface ANALOG/DIGITAL Blending Instrument Interface FeaturesSeries Pickup Selector Switch Tracking Enhancers Trim Tracking Enhancer to fit under the bridge foot Installation InstructionsZeta Music Systems, Inc. ZMC-200 Manual Rev2.0 Zeta Music Systems, Inc. ZMC-200 Manual Rev2.0 Violinists and Bassists Global ModeGlobal Settings for Pickup Systems Four Modes of OperationUtility Mode Preset ModeChain Mode Hold Channel Global ModeGlobal Parameters Basic ChannelSND Pbendrg SEQ ChannelPbend Range Instrument no Local ModeTune Base TRIG. Level TYPSense Tutorial Sensitivity AdjustmentsPAN Enable CC DEFAULTS… REV EnableChor Enable VAR EnableMidi Mapping Instrument Tuner Preset ModePreset Parameters Recalling PresetsQuantize Preset ProgrammingVolume TransposeChorus PAN POSPAN Spread ReverbDynamic Controller VariationVEL Sense VEL OffsetCOM String ModeCommon Hold Preset 1…128SEP HoldmdSEQ Tempo EXT., 41…240 Volume OFFSEQ Pattern OFF, 1…32 SEQ Track OFF, 1…8Arpeg Layer Preset 1…128Scan Arpeg PresetTempo LengthPattern Blues SEQ Pattern Sync ON, OFFOctaves 1…4 VelocityHold Controller Editing Hold PresetsCntrl Wheelcntl SEQ TempoStack NRPN/RPN VAR REVChor Understanding the Display Chain ModeProgram 1…128 Creating Chain PresetsChain Preset Name max Characters …32 Saving Chain PresetsSynthony TUTORIAL- Setting UP a ChainSynthony Zeta Music Systems, Inc ZMC-200 Manual Rev2.0 Utility Mode Xmit SYSEX… Dclic RespnsSEQUENC… Total DUMP…ARP-PATTRN… ALL, 1…16 EFFECTS…Variat Send Variation Effect 0…127 Reverb SendChorus Send Drum Instrument 1…4 ModeKIT STANDARD1…SFX2 Steps 1…16ADC Monitor TrackExternal Midi instrument doesn’t play Problem SolvingFactory Reset AppendixWrong sounds Varying string volume levelsSometimes wrong notes Dynamic difference between notes is too greatSystem Exclusive Implementaton Utility ModeZeta Music Systems, Inc ZMC-200 Manual Rev2.0 Electric Piano Family SoundsPiano Organ CpercussionAcoustic Bass Acoustic GuitarElectric Guitar Ensemble Electric BassSynth Bass StringsSynth Brass BrassSlead ReedsPipe SyEffect Synth PadEthnic Sound Effects PercussionDrums User Presets TypeEffect Effects Types ListVariations ROOM2 CHORUS1 Auto PAN Livingston Street Oakland, CA Zeta Music SYSTEMS, INCManufactured Exclusively for

ZMC-200 specifications

ZETA Music Systems has introduced the ZMC-200, a groundbreaking music production console designed for both professional studios and aspiring musicians. The ZMC-200 combines innovative technology with user-friendly features, making it an ideal choice for a wide range of audio tasks, from recording and mixing to mastering and sound design.

One of the main features of the ZMC-200 is its advanced digital audio workstation (DAW) integration. The console supports seamless compatibility with popular DAWs, such as Ableton Live, Pro Tools, and Logic Pro, allowing users to control their music production software effortlessly. This integration enables enhanced workflow and efficiency, giving musicians the ability to focus on creativity rather than technical hurdles.

The ZMC-200 boasts a comprehensive set of input and output options, including multiple XLR and TRS inputs for microphones and instruments, as well as a range of digital connectivity options like USB-C and MIDI I/O. This versatility ensures that users can connect various devices and instruments seamlessly, making it perfect for live performances and studio configurations alike.

Another standout characteristic of the ZMC-200 is its high-resolution touchscreen interface. This intuitive display allows users to navigate their projects with ease, providing vivid visual feedback and quick access to essential controls. The console also features customizable layouts, enabling users to tailor their workspace to suit their specific needs and preferences.

Sound quality is paramount in any music production system, and the ZMC-200 delivers exceptional performance. Equipped with premium preamps and converters, the console captures audio with clarity and precision, resulting in professional-grade recordings. Furthermore, advanced onboard DSP effects allow users to apply high-quality reverb, delay, and compression in real time, enhancing the creative process without the need for external plugins.

The ZMC-200 also emphasizes portability and durability, making it suitable for both studio use and mobile applications. Its robust construction ensures longevity, while its lightweight design allows for easy transport. Musicians can confidently take the ZMC-200 on the road, knowing they have a reliable and high-performing companion for their music endeavors.

In summary, the ZETA Music Systems ZMC-200 is a versatile and advanced music production console that caters to the needs of musicians, producers, and audio engineers alike. With its seamless DAW integration, comprehensive connectivity, intuitive interface, exceptional sound quality, and portability, the ZMC-200 is poised to set new standards in the music production landscape. Whether in a professional studio or a bedroom setup, the ZMC-200 empowers users to create and explore their musical visions.