Intel PPC-1772PT user manual Installation, How to load Windows O.S, Touch screen driver

Page 8

Award BIOS Setup

SECTION 2 INSTALLATION

2.1How to load Windows O.S.

Put the legal MicroSoft Windows XP CD into the CD-ROM of the PPC-1573PT, follow the instructions step by step and finish the installations of the Windows XP Home or Pro. The installation procedure is same as those ordinary desktop PC.

Sometimes it is better to enter into the BIOS to select CD-ROM as the primary boot-up disk.

SECTION 3 TOUCH SCREEN DRIVER INSTALLATION

3.1Touch screen driver

The touch driver was contained in the CD Disk came with the unit. There are two touch drivers. One is E-T, one is S-M. Please choose E-T touch driver to load into the PPC. After loading the E-T touch driver, you must perform a 25-point calibration on the touch. Please be sure that each touch point must be calibrated one by one. After all of the 25 touch points were calibrated. The touch driver is successfully loaded.

3.225-Point Calibration

Touch the center point of the blinking icon one by one until all 25 points were calibrated.

Image 8
Contents PPC-1772PT Copyright TrademarkContents Introduction Dimensions I/O Ports Power Adapter and Optional Accessories Specifications IP & NemaTouch screen driver InstallationHow to load Windows O.S Bios Set-up Bios SetupBios Setup CPU Clock and Ratio setting HOW to Order a Panel PC PPC