Elo TouchSystems 1525/27L manual Removing the Back Cover

Page 12

STEP 1-Removing the Back Cover

Bottom cut-out

The cables are routed through the back of the stand.

To remove the back cover, place one hand at the top of the stand and your other hand on the bottom cut-out.

Pull forward from the bottom cut-out and twist the cover until it snaps off. The cable ports are located on the underside of your touchmonitor.

2-7

Image 12
Contents Page Elo Entuitive Touchmonitor User Guide Copyright 2003 Elo TouchSystems Inc. All Rights Reserved Page Table of Contents Precautions IntroductionAbout the Product Page Installation and Setup Unpacking Your TouchmonitorProduct Overview Side View Touch Interface Connection Serial ConnectionRemoving the Back Cover Connecting the Video Cable Connecting the Serial Touchscreen Cable Connecting the Speaker Cable Connecting the Power Cable Replacing the Back CoverUSB Connection Removing the Back Cover Cable management clip Connecting the USB Touchscreen Cable Connecting the Speaker Cable Connections on underside Power cable Optimizing the LCD Display Vesa Mount on Your TouchmonitorAccessing the Vesa Mounting Interface Mounting the BaseInstalling the Driver Software Installing the Serial Touch Driver for Windows XP, Windows 2000, Me, 95/98 and NTInstalling the Serial Touch Driver for MS-DOS and Windows Page Page About Touchmonitor Adjustments Using the On-Screen Display OSD MenusOperation Side Bezel Buttons Control FunctionOSD Menu Function ContrastPage Troubleshooting Solutions to Common ProblemsPage Native Resolution Input Video 15 LCDPage Touchmonitor Safety Care and Handling of Your Touchmonitor Technical Specifications Compatible Video ModesTouchmonitor Specifications Optical Electrostatic Positional Accuracy LCD Touchmonitor ET15XXL-XXWC-1 Dimensions Detail B Page Electrical Safety Information Regulatory InformationPage N10051 Page Warranty Page Index