Gateway FHD2102 manual Card Reader Option, Connecting the power

Page 9

www.gateway.com

Card Reader (Option)

The Card reader is on the left hand side of the monitor as shown and supports XD/SD/MMC/MS. In order to use the card reader, your monitor needs to be connected to your computer using the supplied USB A-B cable.

Card Reader

Connecting the power

Connect the power:

1Position your monitor so you can reach the back, then connect the power cord to the power connector at the back of the monitor.

2Plug the power cord into a correctly grounded power outlet. We recommend using a surge protector to protect your monitor from voltage spikes.

3To make sure that the monitor’s power is correctly connected, check the power button on the right hand side. The power icon on the power button should be glowing purple. If the power icon is not visible, power is not connected.

5

Image 9

Contents Userguide Page Contents Contents Using Your Gateway Flat-Panel Monitor Connecting video inputs Connecting the monitorConnecting audio input only for VGA/DVI input Tip Connecting USB cables OptionCard Reader Option Connecting the powerBasic front view Connecting a security cableUsing the EzTouch menu buttons Adjusting the angleStarting the monitor Turning on the monitorUsing the shortcut menu Adjusting monitor settingsGeometry menu Using the main menuOSD Menu Description Audio menu Changing color depth and screen resolution Changing Windows screen settingsHelp Low 8-bit = 256 colors Medium 16-bit = 65,500 colorsVideo modes ResolutionPower management MaintenaceEnergy declaration No power TroubleshootingNo picture Display colors are wrongFAQs Technical How ToVideo/Display Connections and inputs SpecificationsAppendixa Setting up your system Important safety informationRegulatory compliance statements Environmental informationRecycling United States of AmericaCalifornia Proposition 65 Warning CanadaPage MUC 0 8 0 0 0 0