For example, connecting only the analog audio outputs of the changer to the FireBall will not provide digital audio on the digital outputs of the FireBall.
YES
YES
YES
Internet Radio
YES
YES
Changer Coax
YES
YES
Changer Optical
YES
Changer Analog
Analog Out
Audio Source
Digital Coax Out
This table shows which audio outputs are active for each type of audio source.
Digital Optical
Out
ADDITIONAL CONNECTION AND HOOKUP INFORMATION
DIGITAL AUDIO INPUTS
The FireBall defaults to the optical inputs for changer audio. If you are using the coax inputs it is necessary to manually change the digital inputs from optical to coax using the Setup / Audio / Digital Input Preferences screen.
AUDIO OUTPUTS
The optical, coax, and analog audio outputs are all active when playing media from the internal hard drive or Internet Radio. Both digital and analog connections must be made from the changer to the FireBall for the FireBall to output both digital and analog outputs.
FireBall™ DVDM-100 User’s Manual
PAGE 27