Durabrand PDV-722 Selecting the TV Type, Default Resetting the functions to factory defaults

INITIAL SETTING

Selecting the TV TYPE

Select the aspect ratio of the movie to match the LCD screen and your TV set. There are three types of screen sizes you may select.

NOTE: If your DISC is not encoded to allow you to change the aspect ratio, the TV display cannot be changed.

SYSTEM	LANGUAGE	AUDIO	VIDEO
SYSTEM SETUP
TV SYSTEM
LCD MODE
TV TYPE		4:3 PS
SLEEP CONTROL		4:3 LB
DEFAULT		16:9
EXIT SETUP

4 X 3 Standard (4:3 PS PAN and SCAN) - Choose this setting if you want to see the movie fill the entire screen of your TV. This might mean that parts of the picture (the left and right edges) won’t be seen.

Most discs produced in a WIDESCREEN format can’t be cropped in this fashion.

4X3 Standard

4X3 Letterbox

4 X 3 Letterbox (4:3 LB LETTER BOX) - Choose this setting if you want to see movies in their original aspect ratio (width-to- height ratio). You’ll see the entire frame of the movie, but it will take up a smaller portion of the screen vertically. The movie will appear with black bars at the top and bottom of the screen, but you will see everything to the left & right of the center as in a movie theater.

	16 X 9 Widescreen (16:9) - Choose this setting if your DVD
	Player is connected to a WIDESCREEN TV. If you choose this
	setting and you don’t have a widescreen TV, the images on the
	screen may appear distorted due to vertical compression (faces
	may seem long and thin).
	If you play a disc recorded in 4 X 3 format on a widescreen TV, the
16X9 Widescreen	left and right side of the screen will appear black. Press SETUP
	button to change to 4:3 ratio or match the type of TV you have.
	NOTE: For 16:9 Widescreen TV TYPE, you need to adjust both
	the LCD mode and the TV TYPE to 16:9 (see page 24 for Setting
	the LCD MODE).

Default - Resetting the functions to factory defaults

In case you fiddled around with your set’s controls and you cannot return the set to its normal operation; you can reset the major options on this set.

NOTE: If you select “DEFAULT” and “RESTORE”, then press OK, all items in the setup menu will be reset to their factory default settings.

SYSTEM LANGUAGE AUDIO VIDEO

SYSTEM SETUP

TV SYSTEM

LCD MODE

TV TYPE

SLEEP CONTROL

DEFAULTRESTORE

EXIT SETUP

25 IB-PDV722-WM-E-012007

IB-PDV722-WM-E-012007.pmd26

2/12/2007, 1:20 AM