Anti-Theft protection, Entering the code number

Anti-Theft protection

The unit is protected by a code. For US operation please use the 5 digit code supplied on the code card. If the 4 digit Europe code is used the radio will not tune into stations properly. To use this unit in Europe, additional programming steps may be required.

Store the code card in a secure location outside of the vehicle. You may be required to re-enter the code after servicing your vehicle or when the battery is disconnected.

The LED (figure 1 #5) will flash when the ignition is switched off.

You can apply the security stickers to the vehicles door windows for additional theft protection.

Entering the code number:

When power is supplied to the unit the display should look like this:

Use the station preset keys 1-6 (figure 1 # 7) to enter the 5 digit code. For example, if the code is 63251, press 6 key followed by the 3,2,5 & 1 key.

When the entire code has been entered press:(figure 1

# 8)to the right to confirm. (right arrow)

2007 12v Electronics

This manual and its contents may not be copied or reproduced without permission from 12v Electronics. For more

information please email: info@12velectronics.com